Jonsered CS 2255 manual Fueling, Fuel safety, Transport and storage, Long-term storage

Page 19

FUEL HANDLING

Fueling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling. The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

!flammable. Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with visible

!damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EPA II Operator’s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerSome terms that describe the bar and chain Cutting equipment designed to reduce kickbackBar ChainSharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral advice on adjusting depth gauge setting General information on sharpening cutting teethChain oil Adjustment of depth gauge settingTensioning the chain Lubricating cutting equipmentNeedle bearing lubrication Filling with chain oilChecking chain lubrication Chain drive sprocketBar Fitting the bar and chain AssemblyCS 2255 with tool-less chain tensioner Assembly Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules General Basic cutting techniqueTerms Cutting LimbingClearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionDirectional cuts FellingCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped treeWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking the inertia brake release Correctly adjusted carburetorChecking brake band wear Checking the front hand guardThrottle lockout Starter MufflerChanging a broken or worn starter cord Fitting the starter Air filterTensioning the recoil spring Changing a broken recoil springNeedle bearing lubrication Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketTemperature 0C 32F or colder Turbo Air Cleaning centrifugal cleaningWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions´z+RsG¶5m¨ Page 1150833-95 ´z+RsG¶5m¨ ´z+RsG¶5m¨

CS 2255 specifications

The Jonsered CS 2255 is a versatile and powerful chainsaw designed for both homeowners and professional users who require reliability and efficiency in their cutting tasks. This model is particularly well-regarded for its robust performance and user-friendly features, making it a popular choice among outdoor enthusiasts and forestry workers alike.

One of the most commendable features of the Jonsered CS 2255 is its highly efficient engine. Equipped with a 55.5cc two-stroke engine, it delivers exceptional power output while ensuring lower emissions and reduced fuel consumption. The engine is designed with advanced technology that minimizes the environmental impact without compromising on performance. This balance of power and efficiency makes the CS 2255 ideal for a variety of cutting applications, from felling trees to trimming branches.

The CS 2255 is also notable for its ergonomic design. The chainsaw incorporates a well-thought-out handle system that provides optimal comfort during extended use. The comfortable grips reduce fatigue and enhance control, allowing users to work longer without discomfort. Furthermore, the low vibration technology integrated into the design significantly decreases vibration levels, leading to a smoother operation and improved handling.

Another distinguishing feature of the Jonsered CS 2255 is its quick-start system, which simplifies the starting procedure. Users appreciate this feature, especially in colder weather conditions or when the chainsaw hasn't been used for a while. The easy start mechanism ensures reliability and efficiency, enabling the user to get to work without unnecessary delays.

Safety is a primary concern in chainsaw operation, and the CS 2255 is equipped with various safety mechanisms to mitigate risks. The chainsaw comes with an effective chain brake and a throttle lock that helps prevent accidental starts. These features provide peace of mind for users who prioritize safety while working in demanding environments.

In addition to its impressive features, the Jonsered CS 2255 supports ease of maintenance. The tool-less chain tensioning system enables quick adjustments, while the air injection system reduces filter cleaning intervals. These qualities enhance the overall user experience and ensure that the chainsaw remains in top condition with minimal effort.

Whether you are a seasoned professional or a casual user, the Jonsered CS 2255 offers a combination of power, efficiency, and user-friendly features that make it an excellent choice for all your cutting needs.
Top Page Image Contents