Jonsered CS 2255 Maintenance schedule, Daily maintenance Weekly maintenance Monthly maintenance

Page 37

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain brake

 

for wear. Replace when less than 0.024

Clean the outside of the machine.

converter, check the cooling system

inch (0.6 mm) remains at the most worn

 

weekly.

 

point.

 

 

 

 

 

Check that the components of the throttle

Check the starter, starter cord and return

Check the clutch centre, clutch drum and

control work safely. (Throttle lockout and

spring.

clutch spring for wear.

throttle control.)

 

 

 

 

 

Clean the chain brake and check that it

 

 

operates safely. Make sure that the chain

Check that the vibration damping

Clean the spark plug. Check that the

catcher is undamaged, and replace it if

elements are not damaged.

electrode gap is 0.020 inch (0.5 mm).

necessary.

 

 

 

 

 

The bar should be turned daily for more

 

 

even wear. Check the lubrication hole in

 

 

the bar, to be sure it is not clogged. Clean

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

the bar groove. If the bar has a sprocket

 

 

tip, this should be lubricated.

 

 

 

 

 

Check that the bar and chain are getting

File off any burrs from the edges of the

Check fuel hose for cracks or other

sufficient oil.

bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to visible

 

 

cracks in the rivets and links, whether the

Clean or replace the spark arrestor

 

saw chain is stiff or whether the rivets and

Empty the fuel tank and clean the inside.

links are abnormally worn. Replace if

screen on the muffler.

 

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its tension

 

 

and condition. Check the drive sprocket

Clean the carburetor compartment.

Empty the oil tank and clean the inside.

for excessive wear and replace if

 

 

necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if necessary.

Check all cables and connections.

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks from

 

 

the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic converter,

 

 

check the cooling system daily.

 

 

 

 

 

English – 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents EPA II Operator’s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesBar Cutting equipment designed to reduce kickbackChain Some terms that describe the bar and chainGeneral advice on adjusting depth gauge setting Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Sharpening cutting teethTensioning the chain Adjustment of depth gauge settingLubricating cutting equipment Chain oilChecking chain lubrication Filling with chain oilChain drive sprocket Needle bearing lubricationBar Fitting the bar and chain AssemblyCS 2255 with tool-less chain tensioner Assembly Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules General Basic cutting techniqueTerms Cutting LimbingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatDirectional cuts FellingFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking brake band wear Correctly adjusted carburetorChecking the front hand guard Checking the inertia brake releaseThrottle lockout Starter MufflerChanging a broken or worn starter cord Tensioning the recoil spring Air filterChanging a broken recoil spring Fitting the starterSpark plug Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationTemperature 0C 32F or colder Turbo Air Cleaning centrifugal cleaningWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautions´z+RsG¶5m¨ Page 1150833-95 ´z+RsG¶5m¨ ´z+RsG¶5m¨

CS 2255 specifications

The Jonsered CS 2255 is a versatile and powerful chainsaw designed for both homeowners and professional users who require reliability and efficiency in their cutting tasks. This model is particularly well-regarded for its robust performance and user-friendly features, making it a popular choice among outdoor enthusiasts and forestry workers alike.

One of the most commendable features of the Jonsered CS 2255 is its highly efficient engine. Equipped with a 55.5cc two-stroke engine, it delivers exceptional power output while ensuring lower emissions and reduced fuel consumption. The engine is designed with advanced technology that minimizes the environmental impact without compromising on performance. This balance of power and efficiency makes the CS 2255 ideal for a variety of cutting applications, from felling trees to trimming branches.

The CS 2255 is also notable for its ergonomic design. The chainsaw incorporates a well-thought-out handle system that provides optimal comfort during extended use. The comfortable grips reduce fatigue and enhance control, allowing users to work longer without discomfort. Furthermore, the low vibration technology integrated into the design significantly decreases vibration levels, leading to a smoother operation and improved handling.

Another distinguishing feature of the Jonsered CS 2255 is its quick-start system, which simplifies the starting procedure. Users appreciate this feature, especially in colder weather conditions or when the chainsaw hasn't been used for a while. The easy start mechanism ensures reliability and efficiency, enabling the user to get to work without unnecessary delays.

Safety is a primary concern in chainsaw operation, and the CS 2255 is equipped with various safety mechanisms to mitigate risks. The chainsaw comes with an effective chain brake and a throttle lock that helps prevent accidental starts. These features provide peace of mind for users who prioritize safety while working in demanding environments.

In addition to its impressive features, the Jonsered CS 2255 supports ease of maintenance. The tool-less chain tensioning system enables quick adjustments, while the air injection system reduces filter cleaning intervals. These qualities enhance the overall user experience and ensure that the chainsaw remains in top condition with minimal effort.

Whether you are a seasoned professional or a casual user, the Jonsered CS 2255 offers a combination of power, efficiency, and user-friendly features that make it an excellent choice for all your cutting needs.
Top Page Image Contents