Jonsered GR 2032D Safety Instructions, Personal protective equipment, Machine‘s safety equipment

Page 4

SAFETY INSTRUCTIONS

Personal protective equipment

IMPORTANT INFORMATION

• Incorrect or careless use of a clearing saw,

brushcutter or trimmer can turn it into a dangerous

tool that can cause serious or even fatal injury to

the operator or others. It is extremely important

that you read and understand the content of this

manual.

• When using a clearing saw, brushcutter or trimmer,

protective equipment approved by the appropriate

authorities must be used. Personal protective

equipment does not eliminate the risk of

accidents, however, it can reduce the effects of an

The machine‘s safety equipment

This section describes the machine‘s safety equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on your machine.)

!WARNING!

Never use a machine with defective safety equipment. Follow the control, maintenance and service instructions described in this section.

injury in the event of an accident. Ask your dealer

for help when choosing protective equipment.

WARNING!

!Remove your hearing protection as soon as

you stop the engine, so that you can hear

any noises or warning signals.

HELMET

A helmet should be worn if trees to be cleared are higher than 2 metres.

EAR PROTECTION Ear protection offering sufficient dampening effect should be used.

EYE PROTECTION Blows from branches or objects thrown by the rotating cutting equipment can damage the eyes.

GLOVES

Gloves should be worn when necessary, e.g., when assembling cutting equipment.

BOOTS

Use anti-slip and stable boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on shrubs and branches. Always wear heavy-duty long pants. Do not wear jewellery, shorts, sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

A first aid kit should be carried by operators of clearing saws, brushcutters or trimmers.

1.Throttle trigger lock

The throttle trigger lock is designed to prevent the throttle from accidentally being engaged. When the trigger lock (A) is pressed into the handle (= when you hold the handle) the throttle

(B)is released. When the grip on the handle is released the throttle and the throttle trigger lock return to their original positions. This takes place via two independent return spring systems. This means that the throttle is automatically locked in its “idling“ position.

A

B

A

B

4 – English

Image 4
Contents Operator´s manual EPASymbol Explanation SymbolsContents Safety Instructions Machine‘s safety equipmentPersonal protective equipment Throttle trigger lockStop switch Cutting attachment guardAnti-vibration system Quick-releaseCutting equipment MufflerLocking nut Throttle trigger lock Vibration damping system Cutting equipment Cutting equipment Sharpening the clearing bladeSharpening the grass blade Trimmer headGeneral safety instructions Start Fuel safetyTransport and storage 10 ftBasic safety precautions General working instructionsBasic clearing techniques Adjusting the harness and clearing sawDesignations Clearing‘s ABC Forestry clearing using a saw bladeWorking methods Brush cutting using the saw blade Brush cutting using a grass bladeGrass clearing using the trimmer head and plastic knifes ClearingTrimming SweepingWhat is WHAT? What is what on the brushcutter?Assembling the handlebars GR2036 AssemblyTransport position, handlebars Assembling the blade guard and grass blade Axle is lockedAssembling other guards and cutting equipment Adjusting the harness and clearing saw Fuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop Maintenance CarburetorFinal setting of the idling speed T High speed needle H Correctly adjusted carburetorMuffler Cooling systemAngle gear Air filter Spark plugFiling the grass blade Maintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical data Technical DataGR 2026D GR 2032D Approved accessories GR2032D Type Cutting attachment Approved accessories GR2036 Type Cutting attachmentType Cutting attachment Guard Art No Guard Ref NoEmission Control Warranty Statement Your Warranty Rights ObligationsAuto Poly Trim Click Trimmy H Trimmy SII ~ 15 cm ´*xt=¶5Q¨ Page 108 88 2002W04