Jonsered GR 2036 manual Technical Data, Technical data, GR 2026D GR 2032D

TECHNICAL DATA

Technical data

Engine

Displacement, cu. in/cm3 Cylinder bore, inch/mm Stroke length, inch/mm Idling speed, rpm Recommended max. speed, rpm Speed of output shaft, rpm

Max. engine output, acc. to ISO 8893 Catalytic converter muffler Speed-regulated ignition system

gnition system Manufacturer/type of ignition system Spark plug

Electrode gap, inch/mm

Fuel lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/litres

Weight

Weight without fuel, cutting tool and guard, Lbs/kg

Sound levels (se note 1) Equivalent sound pressure level at the user’s ear, measured according to ANSI

B175.3-1997, dB(A), min/max:

Vibration levels

Vibration levels on the handles, measured according to ANSI B175.3-1997, m/s2 When idling, left/right handles, min: When idling, left/right handles, max:

At max. speed, left/right handles, min: At max. speed, left/right handles, max:

GR 2026D	GR 2032D	GR 2036
1,64/26,9	1,88/30,8	2,21/36,3
1,38/35	1,38/35	1,50/38
1,10/28	1,26/32	1,26/32
2 700	2 700	2 700
11 000-11 700	11 000-11 700	11 000-11 700
10 000	10 000	10 000
0,9 KW/ 9 000 rpm	1,1 KW/ 8 400 rpm	1,3 KW/ 9 000 rpm
Yes	Yes	Yes
Yes	Yes	Yes
Walbro CD	Walbro CD	Walbro CD
Champion RCJ 7Y	Champion RCJ 7Y	Champion RCJ 7Y
NGK BPMR7A	NGK BPMR7A	NGK BPMR7A
0,02/0,5	0,02/0,5	0,02/0,5
Walbro WT	Walbro WT	Walbro WT
1,06/0,5	1,06/0,5	1,06/0,5
13,2/6,0	14,3/6,5	16,1/7,3
93/99	90/100	92/101
2,0/2,2	2,5/2,5	2,2/2,7
2,2/3,0	3,0/3,5	2,7/4,3
1,8/2,1	2,0/2,0	3,5/5,0
2,5/3,6	5,1/4,9	4,5/6,2

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Sound pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 29