Jonsered LT2226 A2 manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 6

ASSEMBLY

NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing brake pedal.

•Place freewheel control in disengaged position to dis- engage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before op- erating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LT2226 A2 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Using the Reverse Operation System To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTo Operate on Hills Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelTo Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Maintenance Lubrication ChartBrake Operation BatteryTractor TiresEngine Spark Plugs CleaningMuffler IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig Service and Adjustments To Level Mower To Replace Mower Drive Belt See Fig To Replace Motion Drive Belt See FigTo Check Brake To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Engine dies when Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

LT2226 A2 specifications

The Jonsered LT2226 A2 is a state-of-the-art lawn tractor designed to deliver exceptional performance and reliability for homeowners looking to maintain their lawns effortlessly. With a robust construction and an array of advanced features, this model stands out in the competitive market of garden maintenance equipment.

One of the primary features of the LT2226 A2 is its powerful 726 cc engine, which ensures efficient cutting and robust performance across various terrains. The engine is engineered for low emissions, making it an environmentally friendly choice for conscientious users. Its high-speed capabilities allow for quicker mowing sessions without compromising on the quality of cut, thus saving valuable time.

The chassis of the LT2226 A2 is built for durability, featuring a strong, steel frame designed to withstand the rigors of regular use. The tractor’s cutting deck is another notable aspect; the 102 cm / 40-inch cutting width enables the lawn tractor to cover more ground in fewer passes. With adjustable cutting heights, users can customize their grass trimming to suit specific lawn care needs.

One of the standout technologies integrated into the LT2226 A2 is the patented articulated steering system. This feature enhances maneuverability, allowing users to navigate tight corners and obstacles with ease. The ergonomic design of the steering wheel and comfortable seat provides superior driver comfort, reducing fatigue during extended mowing sessions.

Moreover, the LT2226 A2 is equipped with a hydrostatic transmission. This advanced transmission system provides seamless acceleration and deceleration, making it user-friendly, especially for those new to riding lawn tractors. The foot-operated pedals facilitate smooth operation without the need for manual gear shifts.

Additionally, the tractor boasts a mulching function that finely chops the grass clippings and returns them to the lawn, acting as a natural fertilizer. This feature not only helps in reducing lawn waste but promotes healthier grass growth.

Safety is a top priority with the Jonsered LT2226 A2. The tractor is fitted with an automatic brake system that engages when the operator leaves the seat, ensuring a heightened safety feature during operation.

In conclusion, the Jonsered LT2226 A2 is a well-rounded lawn tractor that combines power, efficiency, and user-friendly features. Whether you are a seasoned lawn care enthusiast or a beginner, this model is designed to make your mowing experience smooth and productive. With its blend of innovative technology and comprehensive design, the LT2226 A2 is an excellent investment for maintaining a pristine lawn.
Top Page Image Contents