Jonsered LT2220 CMA2 manual Know Your Tractor

Page 11

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

 

SERVICE

ROS "ON"

IGNITION

REMINDER/

POSITION

HOURMETER

ATTACHMENT

SWITCH

 

 

CLUTCH SWITCH

 

 

 

 

LIFT LEVER

 

 

PLUNGER

CLUTCH/BRAKE

 

LIGHT SWITCH

PEDAL

 

 

 

 

ATTACHMENT

 

 

LIFT LEVER

THROTTLE/CHOCK

 

CONTROL

 

 

PARKING

 

BRAKE

HEIGHT

MOTION

CONTROL

ADJUSTMENT KNOB

LEVER

 

FREEWHEEL

CONTROL

Fig. 9

Our tractors conform to the applicable safety standards of the American National Standards Institute.

ATTACHMENT CLUTCH SWITCH - Used to engage the mower blades, or other attachments mounted to your tractor.

ATTACHMENT LIFT LEVER - Used to raise and lower the mower deck or other attachments mounted to your tractor.

THROTTLE/CHOKE CONTROL - Used for starting and controlling engine speed.

CLUTCH/BRAKE PEDAL - Used for declutching and brak- ing the tractor and starting the engine.

FREEWHEEL CONTROL - Disengages transmission for pushing or slowly towing the tractor with the engine off.

HEIGHT ADJUSTMENT KNOB - Used to adjust the mower cutting height.

SERVICE REMINDER/HOURMETER - Indicates when

service is required for the engine and mower.

IGNITION SWITCH - Used for starting and stopping the engine.

LIFT LEVER PLUNGER - Used to release attachment lift lever when changing its position.

LIGHT SWITCH - Turns the headlights on and off.

MOTION CONTROL LEVER - Selects the speed and direction of tractor.

PARKING BRAKE - Locks clutch/brake pedal into the brake position.

THROTTLE CONTROL - Used to control engine speed.

REVERSE OPERATION SYSTEM (ROS) "ON" POSITON - Allows operation of mower deck or other powered attach- ment while in reverse.

11

Image 11
Contents LT2220 CMA2 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceIII. Children Table of Contents Unassembled Parts Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonTo Install Bagger Components to Tractor See Figs A-4D Install Seat See FigTo Assemble Bagger See Figs A-5C Bagger Adjustment SeeHorizontal Adjustment Vertical AdjustmentCheckforproperpositionofallbelts To Assemble and Install Mulcher Plug See FigCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Stop Mower Blades See FigCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine To Transport See FigAutomatic Transmission Warm UP To Start Engine See FigPurge Transmission Bagging See Fig To Dump Bagger See FigTo Convert Mower See Fig Mulching Mowing Tips Mowing TipsLubrication Chart MaintenanceCheck Operator Presence System TractorBlade CARESee Figs.20-22 Star Pattern BladeEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTo Adjust Carburetor Transmission REMOVAL/REPLACEMENTTo Adjust Throttle Control Cable To Adjust Choke ControlEngine OIL StorageOther Fuel SystemTroubleshooting Points With attachment clutch Service Notes Suggested Guide for Sighting Slopes for Safe Operation Jonsered Motor AB