Jonsered BC2043, BC2053 manual Assembling the cutting equipment

Page 12

ASSEMBLY

9Lap and fix the stop switch wires and connectors with clamp (I).

I

10 Refit the air filter cover.

Assembling the cutting equipment

WARNING! When fitting the cutting

!attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

IMPORTANT! If a saw blade or grass blade are to be used the machine must be equipped with the correct handlebar, blade guard and harness.

Fitting the cord cutter and guard extension to the trimmer guard

•Attach the cord cutter to the guard extension with screw and washer as shown.

•Fit the guard extension to the trimmer guard as shown.

Fitting a blade guard, grass blade and grass cutter

•Fit the guard (A) to the gear housing using the support plate (M) and two screws (L).

BL C M

A

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support flange

(F) on the output shaft.

G

E

F

D

B

C

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator′s manual KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Stop switchThrottle lockout Cutting attachment guardVibration damping system Quick releaseMuffler Cutting equipment Locking nutCutting equipment General rulesSharpening grass cutters and grass blades Trimmer headAssembly Connecting throttle cable and stop switch wiresFitting the main body Fitting the handlebarAssembling the cutting equipment Fitting a blade guard, grass blade and grass cutterAdjusting the harness and clearing saw Standard harnessFuel safety Fuel HandlingFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Warm engineBasic safety rules Working TechniquesGeneral working instructions Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headTrimming ClearingSweeping Maintenance CarburettorMuffler Cooling systemCleaning the air filter Bevel gearSpark plug Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe onlyPoly Trim Tap n’ Go 35 Spin Tap n’Go 45 Spin Tap n’Go 55 Spin Trimmy SII Page 1152665-26 ´z+TbT¶6v¨ ´z+TbT¶6v¨

BC2053, BC2043 specifications

The Jonsered BC2043 and BC2053 are powerful brushcutters designed for both professional landscapers and avid gardening enthusiasts. Known for their robust build and reliability, these machines stand out for their capability to handle a variety of vegetation types, from thick underbrush to tough weeds.

One of the main features of both models is their lightweight design, which allows for easy maneuverability during use. The ergonomic handle layout reduces fatigue, making them suitable for prolonged use without discomfort. The BC2043 weighs approximately 10.5 kg, while the BC2053 is slightly heavier due to its enhanced power capabilities. This thoughtful engineering ensures that users can manage demanding tasks with less strain.

Both models are equipped with a high-performance engine that delivers impressive torque and efficiency. The BC2043 features a 43cc engine, while the BC2053 boasts a more powerful 53cc engine. This increase in capacity allows the BC2053 to handle tougher jobs, enabling users to clear dense brush and thick grass with ease. Additionally, both engines utilize advanced technology for reduced emissions and lower fuel consumption, aligning with modern environmental standards.

An outstanding characteristic of the Jonsered BC2043 and BC2053 is their innovative cutting systems. Equipped with a dual-line cutting head and the option to attach various blades, these machines provide versatility in tackling different types of vegetation. The adjustable cutting width allows users to choose between a narrower cut for precision work or a wider cut for larger areas, significantly improving efficiency.

Maintenance is simplified with these models, as they feature easy-access air filters and convenient starting systems. The quick start technology minimizes pull force required to start the engine, making it user-friendly even for those less experienced with power tools.

In summary, the Jonsered BC2043 and BC2053 represent a perfect blend of power, usability, and innovation. With their ergonomic designs, robust engines, and versatile cutting capabilities, they cater to a wide range of landscaping needs. Whether for professional use or personal gardening projects, both brushcutters deliver exceptional performance and reliability, ensuring that users can achieve excellent results in their outdoor endeavors.
Top Page Image Contents