Jonsered BC2053, BC2043 manual Adjusting the harness and clearing saw, Standard harness

Page 13

ASSEMBLY

Fitting other guards and cutting attachments

•Fit the guard (A) to the gear housing using the support plate (M) and two screws (L).

BL C M

A

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head (H) in the opposite direction to the direction of rotation.

•To dismantle, follow the instructions in the reverse order.

Adjusting the harness and clearing saw

WARNING! When using a clearing saw it

!must always be hooked securely to the harness. Otherwise you will be unable to control the clearing saw safely and this can result in injury to yourself or others. Never use a harness with a defective quick release.

Standard harness

Quick release

At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free yourself from the machine and harness.

Spreading the load on your shoulders

A well-adjusted harness and machine makes work much easier. Adjust the harness for the best working position. Tension the side straps so that the weight is evenly distributed across both shoulders.

Correct height

Adjust the shoulder strap so that the cutting attachment is parallel to the ground.

Correct balance

Let the cutting attachment rest lightly on the ground. Adjust the position of the suspension ring to balance the clearing saw correctly.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator′s manual Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lockout Cutting attachment guardQuick release Vibration damping systemMuffler Locking nut Cutting equipmentCutting equipment General rulesTrimmer head Sharpening grass cutters and grass bladesConnecting throttle cable and stop switch wires AssemblyFitting the main body Fitting the handlebarFitting a blade guard, grass blade and grass cutter Assembling the cutting equipmentStandard harness Adjusting the harness and clearing sawFuel Handling Fuel safetyFuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingWarm engine StoppingWorking Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeTrimming ClearingSweeping Carburettor MaintenanceMuffler Cooling systemBevel gear Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Approved accessories Type Cutting attachment guard, Art. noPoly Trim Tap n’ Go 35 Spin Tap n’Go 45 Spin Tap n’Go 55 Spin Trimmy SII Page 1152665-26 ´z+TbT¶6v¨ ´z+TbT¶6v¨

BC2053, BC2043 specifications

The Jonsered BC2043 and BC2053 are powerful brushcutters designed for both professional landscapers and avid gardening enthusiasts. Known for their robust build and reliability, these machines stand out for their capability to handle a variety of vegetation types, from thick underbrush to tough weeds.

One of the main features of both models is their lightweight design, which allows for easy maneuverability during use. The ergonomic handle layout reduces fatigue, making them suitable for prolonged use without discomfort. The BC2043 weighs approximately 10.5 kg, while the BC2053 is slightly heavier due to its enhanced power capabilities. This thoughtful engineering ensures that users can manage demanding tasks with less strain.

Both models are equipped with a high-performance engine that delivers impressive torque and efficiency. The BC2043 features a 43cc engine, while the BC2053 boasts a more powerful 53cc engine. This increase in capacity allows the BC2053 to handle tougher jobs, enabling users to clear dense brush and thick grass with ease. Additionally, both engines utilize advanced technology for reduced emissions and lower fuel consumption, aligning with modern environmental standards.

An outstanding characteristic of the Jonsered BC2043 and BC2053 is their innovative cutting systems. Equipped with a dual-line cutting head and the option to attach various blades, these machines provide versatility in tackling different types of vegetation. The adjustable cutting width allows users to choose between a narrower cut for precision work or a wider cut for larger areas, significantly improving efficiency.

Maintenance is simplified with these models, as they feature easy-access air filters and convenient starting systems. The quick start technology minimizes pull force required to start the engine, making it user-friendly even for those less experienced with power tools.

In summary, the Jonsered BC2043 and BC2053 represent a perfect blend of power, usability, and innovation. With their ergonomic designs, robust engines, and versatile cutting capabilities, they cater to a wide range of landscaping needs. Whether for professional use or personal gardening projects, both brushcutters deliver exceptional performance and reliability, ensuring that users can achieve excellent results in their outdoor endeavors.
Top Page Image Contents