Jonsered BC2043, BC2053 manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

•Approved hearing protection

•Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with applicable EC directives.

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

15 m 50FT

15 m 50FT

Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operator′s manual KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Cutting attachment guardMuffler Vibration damping systemQuick release Cutting equipment Cutting equipmentLocking nut General rulesSharpening grass cutters and grass blades Trimmer headFitting the main body AssemblyConnecting throttle cable and stop switch wires Fitting the handlebarAssembling the cutting equipment Fitting a blade guard, grass blade and grass cutterAdjusting the harness and clearing saw Standard harnessFuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Warm engineGeneral working instructions Basic safety rulesWorking Techniques Basic working techniquesTrimming Grass clearing using a grass bladeGrass trimming with a trimmer head ClearingSweeping Muffler MaintenanceCarburettor Cooling systemSpark plug Cleaning the air filterBevel gear Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe onlyPoly Trim Tap n’ Go 35 Spin Tap n’Go 45 Spin Tap n’Go 55 Spin Trimmy SII Page 1152665-26 ´z+TbT¶6v¨ ´z+TbT¶6v¨

BC2053, BC2043 specifications

The Jonsered BC2043 and BC2053 are powerful brushcutters designed for both professional landscapers and avid gardening enthusiasts. Known for their robust build and reliability, these machines stand out for their capability to handle a variety of vegetation types, from thick underbrush to tough weeds.

One of the main features of both models is their lightweight design, which allows for easy maneuverability during use. The ergonomic handle layout reduces fatigue, making them suitable for prolonged use without discomfort. The BC2043 weighs approximately 10.5 kg, while the BC2053 is slightly heavier due to its enhanced power capabilities. This thoughtful engineering ensures that users can manage demanding tasks with less strain.

Both models are equipped with a high-performance engine that delivers impressive torque and efficiency. The BC2043 features a 43cc engine, while the BC2053 boasts a more powerful 53cc engine. This increase in capacity allows the BC2053 to handle tougher jobs, enabling users to clear dense brush and thick grass with ease. Additionally, both engines utilize advanced technology for reduced emissions and lower fuel consumption, aligning with modern environmental standards.

An outstanding characteristic of the Jonsered BC2043 and BC2053 is their innovative cutting systems. Equipped with a dual-line cutting head and the option to attach various blades, these machines provide versatility in tackling different types of vegetation. The adjustable cutting width allows users to choose between a narrower cut for precision work or a wider cut for larger areas, significantly improving efficiency.

Maintenance is simplified with these models, as they feature easy-access air filters and convenient starting systems. The quick start technology minimizes pull force required to start the engine, making it user-friendly even for those less experienced with power tools.

In summary, the Jonsered BC2043 and BC2053 represent a perfect blend of power, usability, and innovation. With their ergonomic designs, robust engines, and versatile cutting capabilities, they cater to a wide range of landscaping needs. Whether for professional use or personal gardening projects, both brushcutters deliver exceptional performance and reliability, ensuring that users can achieve excellent results in their outdoor endeavors.
Top Page Image Contents