Jonsered BC2053, BC2043 manual Assembly, Fitting the main body, Fitting the handlebar

Page 11

ASSEMBLY

Fitting the main body

Connect the engine (A) to the tube (B) with four screws (C).

A

C

B

Fitting the handlebar

•Fit the handlebar in the handlebar clamp on the shaft using six screws.

•Attach the cabling to the shaft with two cabling holders.

•Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness.

Connecting throttle cable and stop switch wires

1Remove the air filter cover.

2Insert the throttle cable (A) through the carburettor bracket (B), then screw the cable adjuster sleeve (C) into the carburettor bracket fully.

3Position the slotted fitting (D) on the carburettor so the recessed hole (E) for the cable lug (F) is away from the cable adjuster sleeve.

4Rotate the carburettor throttle cam and slip the throttle cable through the slot in the slotted fitting, making sure the cable lug drops into the recessed hole.

5Operate the throttle trigger a few times to make sure that it works correctly.

6Adjust the cable adjuster sleeve so the stop on the carburettor throttle cam just contacts the throttle stop and the cable position keep 1-2 mm play between the cable lug and the slotted fitting when the throttle trigger is fully depressed.

1-2mm

7When the throttle cable is adjusted correctly, tighten the locking nut (G).

8Plug the stop switch wires (H) into the matching connectors from the engine. Note that wire polarity is not important.

H

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator′s manual Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsCutting attachment guard Machine′s safety equipmentStop switch Throttle lockoutMuffler Vibration damping systemQuick release General rules Cutting equipmentLocking nut Cutting equipmentTrimmer head Sharpening grass cutters and grass bladesFitting the handlebar AssemblyConnecting throttle cable and stop switch wires Fitting the main bodyFitting a blade guard, grass blade and grass cutter Assembling the cutting equipmentStandard harness Adjusting the harness and clearing sawFuel Fuel safetyFuel Handling Mixing FuellingStarting Starting and StoppingCheck before starting Starting and stoppingWarm engine StoppingBasic working techniques Basic safety rulesWorking Techniques General working instructionsClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping Cooling system MaintenanceCarburettor MufflerOiling the air filter Cleaning the air filterBevel gear Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Approved accessories Type Cutting attachment guard, Art. noPoly Trim Tap n’ Go 35 Spin Tap n’Go 45 Spin Tap n’Go 55 Spin Trimmy SII Page 1152665-26 ´z+TbT¶6v¨ ´z+TbT¶6v¨

BC2053, BC2043 specifications

The Jonsered BC2043 and BC2053 are powerful brushcutters designed for both professional landscapers and avid gardening enthusiasts. Known for their robust build and reliability, these machines stand out for their capability to handle a variety of vegetation types, from thick underbrush to tough weeds.

One of the main features of both models is their lightweight design, which allows for easy maneuverability during use. The ergonomic handle layout reduces fatigue, making them suitable for prolonged use without discomfort. The BC2043 weighs approximately 10.5 kg, while the BC2053 is slightly heavier due to its enhanced power capabilities. This thoughtful engineering ensures that users can manage demanding tasks with less strain.

Both models are equipped with a high-performance engine that delivers impressive torque and efficiency. The BC2043 features a 43cc engine, while the BC2053 boasts a more powerful 53cc engine. This increase in capacity allows the BC2053 to handle tougher jobs, enabling users to clear dense brush and thick grass with ease. Additionally, both engines utilize advanced technology for reduced emissions and lower fuel consumption, aligning with modern environmental standards.

An outstanding characteristic of the Jonsered BC2043 and BC2053 is their innovative cutting systems. Equipped with a dual-line cutting head and the option to attach various blades, these machines provide versatility in tackling different types of vegetation. The adjustable cutting width allows users to choose between a narrower cut for precision work or a wider cut for larger areas, significantly improving efficiency.

Maintenance is simplified with these models, as they feature easy-access air filters and convenient starting systems. The quick start technology minimizes pull force required to start the engine, making it user-friendly even for those less experienced with power tools.

In summary, the Jonsered BC2043 and BC2053 represent a perfect blend of power, usability, and innovation. With their ergonomic designs, robust engines, and versatile cutting capabilities, they cater to a wide range of landscaping needs. Whether for professional use or personal gardening projects, both brushcutters deliver exceptional performance and reliability, ensuring that users can achieve excellent results in their outdoor endeavors.
Top Page Image Contents