Jonsered CS 2152 manual Contents, Epa

Page 3

CONTENTS

Before using a new saw

•Read the instructions carefully.

•Check cutting equipment is correctly fitted and adjusted. See page 25.

•Refuel and start the saw. Check the carburetor settings. See pages 26-29.

•Do not use the saw until sufficient chain oil has reached the chain, see page 14.

IMPORTANT! If the carburetor mixture is too lean it greatly increases the risk of engine failure.

Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to difficult starting.

If the chain is badly adjusted it will cause increased wear or damage to the bar, drive sprocket and chain.

Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual.

WARNING!

Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine spare parts/accessories. Non-authorized modifications and/or accessories can result in serious perso- nal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

A chain saw is a dangerous tool if used care- lessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand these instructions.

Warning! The inside of the muffler with catalytic converter contains chemicals that may cause cancer. Do not contact inside of damaged muffler.

Long term inhalation of the engine's exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

You will find the following labels on your chain saw:

EPA I:

EPA II:

The Emissions Compliance Period reffered to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.

Category C = 50 hours, B = 125 hours, A = 300 hours.

Contents

 

Key to symbols

2

Safety instructions

 

Personal protective equipment

4

Chain saw safety equipment

4

Inspecting, maintaining and servicing chain saw safety

 

equipment

8

Cutting equipment

10

How to avoid kickback

16

General safety precautions

18

General working instructions

19

What is what?

 

What is what?

24

Assembly

 

Mounting guide bar and chain

25

Fuel handling

 

Fuelmix

26

Fuelling

27

Start and stop

 

Start and stop

28

Maintenance

 

Carburetor

29

Starter device

30

Air filter

31

Spark plug

31

Muffler

31

Needle bearing maintenance

31

Adjustment of the oil pump

31

Cooling system

32

Centrifugal cleaning ”Turbo”

32

Heated handles (CS 2152 W)

32

Winter use

32

Daily maintenance

33

Weekly maintenance

33

Monthly maintenance

33

Technical data

 

CS 2152

34

Emission Control

 

Warranty Statement

 

Your warranty rights and obligations

35

Jonsered has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

English – 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operator´s manual Symbols KEY to SymbolsEPA ContentsPersonal Protective Equipment Safety Instructions3a Starting Chain brake and front hand guardThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainRisk of kickback is increased with a badly sharpened chain Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Sharpening cutting teethGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Never use waste oil Lubricating cutting equipmentChain oil Filling with chain oilLubricating the bar tip sprocket Needle bearing maintenanceChecking chain lubrication Checking wear on cutting equipmentWhat is kickback? HOW to Avoid KickbackGeneral rules Do not let go of the handlesNever use the saw one- handed 10 ft Min mGeneral Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatFreeing a Trapped tree General adviceFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logsWhat is what? What is WHAT?Mounting guide bar and chain AssemblyFuelmix Fuel Handling10ft FuellingChain oil Min 3 mStop Start and StopStart and stop StartCarburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordSpark plug Needle bearing maintenanceAir filter MufflerWinter use Adjustment of the oil pump Heated handles CS 2152 WCentrifugal cleaning Turbo Cooling systemMonthly maintenance Weekly maintenance Daily maintenanceTechnical Data Emission Control Warranty Statement + 46 36 14 65 00. Warranty Period+ 46 36 14 65 2002W36 108 88

CS 2152 specifications

The Jonsered CS 2152 is a powerful and versatile chainsaw designed for both professional and residential use. Known for its reliability and performance, this model packs a host of features and technologies aimed at enhancing the user experience while ensuring efficiency in cutting tasks.

At the heart of the Jonsered CS 2152 is its robust 50.2 cc engine, providing ample power to tackle various wood cutting needs ranging from light trimming to more demanding felling jobs. The engine is equipped with a reliable starter system that facilitates easy starting, minimizing the frustration that can accompany starting a chainsaw. This is further complemented by Jonsered's Smart Start technology, which reduces resistance in the starter cord by up to 40%, making it easier to start with minimal effort.

The CS 2152 incorporates an advanced air filtration system that contributes to longer service intervals and improved engine life. This system reduces the amount of dust and debris that can enter the engine, ensuring optimal performance and reducing wear over time. Additionally, the chainsaw features a powerful centrifugal air cleaning system, which keeps the filter cleaner for longer, enhancing efficiency and reducing maintenance needs.

User comfort and safety are at the forefront of the CS 2152's design. The chainsaw is equipped with an anti-vibration system that minimizes vibrations transmitted to the user's hands, reducing fatigue during prolonged use. The handle design promotes an ergonomic grip, ensuring both comfort and control when operating the chainsaw.

Safety features include a chain brake, which stops the chain instantly in case of kickback, and a throttle lock-out that prevents accidental acceleration. The chainsaw also has easy access to the chain tensioning system, allowing for quick adjustments and ensuring optimal chain performance.

With a compact design weighing approximately 5.5 kg, the Jonsered CS 2152 is lightweight and maneuverable, making it an ideal tool for both novice and experienced users. The combination of these features not only makes this chainsaw a reliable companion for various cutting tasks but also highlights Jonsered's commitment to quality, safety, and user satisfaction in power tools. Overall, the Jonsered CS 2152 is a standout choice for anyone in need of a high-performing chainsaw that balances power, comfort, and ease of use.
Top Page Image Contents