Jonsered CS 2152 manual Changing a broken or worn starter cord, Starter device assembly

Page 30

MAINTENANCE

Starter device

WARNING!

When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

• Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

• Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley. Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

Lift the starter cord up in the notch on the starter pulley

and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

• Lift the starter pulley (see "Changing a broken or worn starter cord"). Bear in mind that the return spring sits under tension in a cassette.

• Dismantle the cassette with

the return spring from the starter.

• Lubricate the recoil spring with thin oil. Assemble the cassette with return spring in the starter. Fit the starter pulley and tension the return spring.

Starter device assembly

Assemble the starter device, by pulling the starter cord out first, then place the

starter against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Image 30
Contents Operator´s manual KEY to Symbols SymbolsContents EPASafety Instructions Personal Protective EquipmentChain brake and front hand guard 3a StartingThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the inertia brake release Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Risk of kickback is increased with a badly sharpened chainGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilChecking wear on cutting equipment Needle bearing maintenanceChecking chain lubrication Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed Min m 10 ftBasic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? What is what?Assembly Mounting guide bar and chainFuel Handling FuelmixMin 3 m FuellingChain oil 10ftStart Start and StopStart and stop StopMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springMuffler Needle bearing maintenanceAir filter Spark plugCooling system Adjustment of the oil pump Heated handles CS 2152 WCentrifugal cleaning Turbo Winter useWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data Emission Control Warranty Statement + 46 36 14 65 00. Warranty Period+ 46 36 14 65 108 88 2002W36

CS 2152 specifications

The Jonsered CS 2152 is a powerful and versatile chainsaw designed for both professional and residential use. Known for its reliability and performance, this model packs a host of features and technologies aimed at enhancing the user experience while ensuring efficiency in cutting tasks.

At the heart of the Jonsered CS 2152 is its robust 50.2 cc engine, providing ample power to tackle various wood cutting needs ranging from light trimming to more demanding felling jobs. The engine is equipped with a reliable starter system that facilitates easy starting, minimizing the frustration that can accompany starting a chainsaw. This is further complemented by Jonsered's Smart Start technology, which reduces resistance in the starter cord by up to 40%, making it easier to start with minimal effort.

The CS 2152 incorporates an advanced air filtration system that contributes to longer service intervals and improved engine life. This system reduces the amount of dust and debris that can enter the engine, ensuring optimal performance and reducing wear over time. Additionally, the chainsaw features a powerful centrifugal air cleaning system, which keeps the filter cleaner for longer, enhancing efficiency and reducing maintenance needs.

User comfort and safety are at the forefront of the CS 2152's design. The chainsaw is equipped with an anti-vibration system that minimizes vibrations transmitted to the user's hands, reducing fatigue during prolonged use. The handle design promotes an ergonomic grip, ensuring both comfort and control when operating the chainsaw.

Safety features include a chain brake, which stops the chain instantly in case of kickback, and a throttle lock-out that prevents accidental acceleration. The chainsaw also has easy access to the chain tensioning system, allowing for quick adjustments and ensuring optimal chain performance.

With a compact design weighing approximately 5.5 kg, the Jonsered CS 2152 is lightweight and maneuverable, making it an ideal tool for both novice and experienced users. The combination of these features not only makes this chainsaw a reliable companion for various cutting tasks but also highlights Jonsered's commitment to quality, safety, and user satisfaction in power tools. Overall, the Jonsered CS 2152 is a standout choice for anyone in need of a high-performing chainsaw that balances power, comfort, and ease of use.