Jacuzzi J-DREAM II owner manual General Assembly Information

Page 5

J-Dream II Owner's Manual

Read all instructions before beginning assembly and installation.

General Assembly Information

The J-Dream II shower unit is installed into a niche with the drain towards the left hand side of the unit as you face the shower door. This manual details the assembly, installation and operation. After the drain, water supply stub-out, and electrical supply are provided, the shower unit should be assembled freestanding away from the walls of the room. Next connect and static test the water supply lines. The electrical connections should then be completed before the unit is moved into final position, drain fit is rechecked, and assembly is completed before final testing.

Room Construction: Important

The room where the shower unit is to be located must be constructed of materials that can withstand excessive amounts of moisture and condensation. Large amounts of steam can be released into the room when the shower door is opened. Providing natural or forced ventilation of the room will help maintain comfort and minimize moisture damage to the building. Jacuzzi Whirlpool Bath is not responsible for damages resulting from excess moisture or water spillage. Consult an architect or engineer for aid in designing your interior structure. Do not install heat lamps directly above the shower unit. The clear top will deform from excess heat.

Water Supply Required

The water supply must be capable of delivering 6 gallons per minute minimum to the unit within a pressure range of 30-65 PSI (2.1-4.6 BAR). Pressures in excess of 65 PSI (4.6 BAR) must be reduced with a regulator in the supply line. This is the amount of water and pressure required to ensure adequate performance of the J-Dream II, it is not the water consumption rate.

NOTE: DO NOT provide less than minimum flow specified. Negative pressure under certain conditions could cause a health hazard by fouling of the house potable water supply.

Electrical Power Required

See Specifications for power required. Power supplied to the unit must be through a *GFCI protected, dedicated circuit with proper bonding and grounding. The GFCI must be located in an area that will allow access for frequent testing.

*GFCI ( Ground Fault Circuit Interrupter) is also known as an ELCB ( Earth Leakage Circuit Breaker.) This device must be a type approved by electrical codes and standards to protect users from potential electrical hazards.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Dream Important Safety Information Contents Front View General Assembly Information Electrical requirements Dream II Packaging Contents of cartonsNUT Washer Screw Side Bracket LAG Screw Clamp Rough-in Locate Base to provide assembly access to all sides Drain Fitting provided with unit Attach Seat Walls to Base J-Dream II with stereo shown Attach Panel #2 to Seat Wall Frame Attach Panel #3 to Seat Wall Frame Install Back Wall Attach Panels #1 and #4 to Seat Walls Panels #1 and #4 not shown in this illustration for clarity Attach Painted Angle Brackets to Panels #1 and #4 Attach Door Frame to Angle Brackets and Base Frame Page Left Seat Wall Back Wall Right Seat Wall Equipment Wall Bonding top left hand side of right hand equipment seat wall Static test water supply hoses for leaks Important Attach Attach Front Panels to UnitTop Cover Page Part II Operating Instructions Starting the Hydromassage MaintenanceCare and Maintenance of SteamPros Troubleshooting Chart Page Page Jacuzzi Whirlpool Bath Responsibilities of Others

J-DREAM II specifications

The Jacuzzi J-DREAM II is a luxurious hot tub that offers a unique blend of comfort, technology, and design, making it a centerpiece for relaxation in any outdoor space. Designed to accommodate several users, the J-DREAM II is ideal for family gatherings or social events with friends. Its spacious seating arrangement includes ergonomically designed lounge and seat options, ensuring that everyone finds a comfortable spot to unwind.

One of the standout features of the J-DREAM II is its advanced hydrotherapy system. Equipped with strategically placed jets, this hot tub delivers a customized massage experience that targets key muscle groups and alleviates tension. The adjustable jets allow users to fine-tune their experience, making it possible to enjoy a soft, gentle massage or a more vigorous hydrotherapy session based on personal preference.

Additionally, the J-DREAM II incorporates innovative technologies that enhance user experience. One such feature is the Smart Control System, which offers a user-friendly digital interface for controlling water temperature, jet intensity, and lighting. Users can easily adjust settings for maximum comfort without the hassle of complicated controls. The integrated LED lighting creates a serene ambiance for evening dips, while optional Bluetooth audio systems allow users to enjoy their favorite music or podcasts during their soak.

The J-DREAM II is constructed with durability and efficiency in mind. The acrylic shell is not only aesthetically pleasing but also designed to retain heat, ensuring energy efficiency during use. Its insulation helps maintain water temperature longer, thus reducing the energy required for heating. Moreover, the cabinet options come in a variety of finishes, enabling customization to match any outdoor decor.

Safety features are also a priority in the J-DREAM II design. It comes with an intuitive safety lock system, ensuring that children cannot access the hot tub without adult supervision. The anti-slip surfaces ensure safety as users enter and exit the tub.

In summary, the Jacuzzi J-DREAM II is more than just a hot tub; it is a luxurious retreat that combines therapeutic benefits with the latest in relaxation technology. With its design, customizable features, and focus on safety, it beckons everyone to experience the ultimate soak in comfort and style.
Top Page Image Contents