Marantz SR4003 manual Speakers Distance, Speakers Level Setting with Test Tone

Page 25

 

ENGLISH

NAMESAND FUNCTIONS

Note:

SURR. BACK SIZE

 

• If “NONE” is selected for the Surround L/R setting,

 

then this setting is fixed to “NONE.”

 

LARGE:

BASIC CONNECTIONS

Select if the surround back speaker is large.

SMALL:

 

 

Select if the surround back speaker is small.

 

Note:

 

If “NONE” is selected for the Surround L/R setting,

BASIC

then this setting is not available.

When you use a subwoofer, you can select the cutoff

 

LPF/HPF

OPERATION

frequency for the small speakers used. Select one of

the crossover frequency levels according to the size

 

 

of the small speaker connected.

 

80Hz → 100Hz → 120Hz → 150Hz → 180Hz

ADVANCED CONNECTIONS

Notes:

• If using small front speakers, set a slightly higher

 

frequency. If using large front speakers, set a slightly

 

lower frequency.

 

• If Pure-Direct mode, 7.1CH Input is in use, this

 

function does not take effect.

 

BASS MIX

SETUP

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for the

subwoofer during stereo playback .

 

This setting has effect only during playback of

 

PCM or analog stereo sources.

 

• When “BOTH” is selected, the low frequencies will

ADVANCED OPERATION

be played through the main L&R, as well as the

sub woofer.

 

 

In this playback mode, the low frequency range

 

expand more uniformly through the room, but

 

depending on the size and shape of the room,

 

interference may result in a decrease of the actual

TROUBLESHOOTING

volume of the low frequency range.

will be played through the sub woofer.

 

• By selecting “MIX”, the low frequencies will play

 

through the main L&R ONLY.

 

Note:

 

LFE signals during playback of Dolby Digital or DTS,

OTHERS

 

2-3 SPEAKERS DISTANCE

Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.

Begin by determining the ideal or most commonly used seating position in the room.

This is important for the timing of the acoustics to create the proper sound space that the unit and today’s sound systems are able to produce.

Note:

For speakers that you have selected “NONE” the Speaker Configuration sub-menu will not appear here. (There are several useful books and special DVD and LD’s available to guide you through proper home theater configuration. If you are unsure, have your Marantz dealer perform the installation for you. They are trained professionals familiar with even the most sophisticated custom installations. Marantz recommends the WWW.CEDIA.ORG website for further information about this).

2-3 SPEAKERS

DISTANCE

DISTANCE UNIT

: m

 

FRONT L

: 3.0

m

FRONT R

: 3.0

m

CENTER

: 3.0

m

SURR.L

: 3.0

m

SURR.R

: 3.0

m

SUB W

: 3.0

m

SURR.B L

: 3.0

m

SURR.B R

: 3.0

m

MAIN RETURN

NEXT

EXIT

 

 

 

1. To select each speaker , press the 3 or 4 cursor buttons.

2. To set the distance for each speaker , press the 1 or 2 cursor buttons.

3. After you complete this portion of the set up, move the cursor to “NEXT” with the 3 or 4 cursor buttons and then press the ENTER button to go to the next page.

FRONT L:

Set the distance from the front left speaker to your normal listening position.

CENTER:

Set the distance from the center speaker to your normal listening position.

FRONT R:

Set the distance from the front right speaker to your normal listening position.

SURR. L:

Set the distance from the surround left speaker to your normal listening position.

SURR. R:

Set the distance from the surround right speaker to your normal listening position.

SUB W:

Set the distance from the subwoofer to your normal listening position.

SURR. B L:

Set the distance from the surround back left speaker to your normal listening position.

SURR. B R:

Set the distance from the surround back right speaker to your normal listening position.

Notes:

•Set the distance to each speaker in meters (m) or feet (ft) as follows.

m:0.1 - 9 m in 0.1 m steps

ft: 0.3 - 30 ft in 0.3 ft steps

•For the speakers that you have selected “NONE” the Speaker Size menu will not appear.

•The setting for Surr.Back L and Surr.Back R appears if you set for it to, two surround back speakers in the Speaker Size menu.

•The setting of Surr.Back appears if it is set for one surround back speaker in the Speaker Size menu.

2-4. SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so that they are all heard by the listener at the same level. We recommend using a SPL (Sound Pressure Level) meter, when available.

Note:

The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.

2-4 SPEAKERS

LEVEL

 

TEST MODE

:

MANUAL

FRONT L

:

0

dB

CENTER

:

0

dB

FRONT R

:

0

dB

SURR.R

:

0

dB

SURR.B R

:

0

dB

SURR.B L

:

0

dB

SURR.L

:

0

dB

SUB W

:

0

dB

MAIN RETURN

 

 

EXIT

 

 

 

 

TEST MODE :

Selects “MANUAL” or “AUTO” for generating the mode of the test tone with the 1 or 2 cursor buttons.

If you select “AUTO” , the test tone will be cycled through in a circular pattern which is Left → Center → Right → Surround Right → Surround Back Right → Surround Back Left → Surround Left → Subwoofer

→Left → .. increments of 2 seconds for each channel.

Using the 1 or 2 cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all the speakers.

If you select “MANUAL”, adjust the output level of each speaker as listed below.

1. When you move the cursor to FRONT L by pressing the 4 cursor button, the unit will emit a pink noise from the front left speaker.

Remember the level of this noise and then press the 4 cursor button.

(Note that this can be adjusted to any level between -10 and +10 dB in 1 dB intervals except the subwoofer setting. The subwoofer can be adjusted to any level between -15 and +10 dB in 1 dB intervals.)

The unit will now emit the pink noise from the center speaker.

2. Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker.

3. Press the 4 cursor button again. The unit will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

After you complete this portion of the set up, press the ENTER button, the cursor will move to “MAIN” and then press the ENTER button to go to SETUP MAIN MENU.

Notes:

•Speakers that you selected “NONE” for in the Speaker Size menu will not appear.

•The setting of Surr.Back L and Surr.Back R appears if you have set it for two surround back speakers in the Speaker Size menu.

•The setting of Surr.Back appears if you have set it for one surround back speaker in the Speaker Size menu.

•To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH-INPUT sub menu. (See page 25).

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents SR4003 Canadian ICES-003 La norme NMB-003 du Canada This Class B digital apparatus complies withRead Before Operating Equipment Important Safety InstructionsIntroduction Table of ContentsBefore USE FeaturesRemote Control Operation of Remote ControllerLoading Batteries Front AUX jack cover Names and FunctionsDigital FL Display and IndicatorPCM SurroundRemote Controller When AMP mode and a mode other than DMP mode are selected When AMP mode is selected Auto buttonStereo button Sleep buttonMonitor OUT 3AUDIO IN/OUT CD, TAPE, CD-R, TV, DVD, VCR, DSSComponent Video Input OutputBasic Connections Speaker PlacementHeight of the Speaker Units Connecting Speaker Wire Connecting SpeakersConnecting a Subwoofer Loosen the knob by turning it counterclockwiseConnecting Audio Components Connecting Digital Audio ComponentsVIDEO, S-VIDEO , Component Jacks Connecting Video ComponentsVideo jack Component jackConnecting Hdmi Components Connecting Hdmi ComponentsHdmi Jack Select an input source from the OSD menu system. SeeConnecting the Supplied Antennas Connecting the AC Power CableConnecting AN FM Outdoor Antenna Connecting AN AM Outdoor AntennaAMP Operation Basic OperationFM Tuning Mode Auto Stereo or Mono Manual TuningUsing the unit Tuner OperationDevice Remote Controller OperationConnecting AN External Power Amplifier Connecting Multi Channel Audio ComponentAdvanced Connections IR=DISABLE Connecting the Remote Control JacksOn Screen Display Menu System SetupSpeaker Setup Speaker SetupSpeakers Size Speakers Distance Speakers Level Setting with Test ToneMeasurement How to OperateDisplay Status Preference Error Indications During MeasurementSurround CH Input Level Music ParameterCS Iicircle Surround II Parameter AMP Operation Using the Sleep Timer Display ModeAdvanced Operation Recording AN Analog SourceDolby Headphone Mode Listening Through HeadphonesNight Mode Bypass → on → BypassAuto Power on Attenuation to Analog Input SignalAuto Power OFF CH InputVideo Convert Video ON/OFFSurround Speaker B System Sorting Preset Stations Clearing Stored Preset StationsName Input of the Preset Station → B → C ... Z → 1 → 2 → 3 .... → → +Controlling a Marantz DVD DVD Mode Controlling a Marantz TV TV ModeControlling a Marantz DSS DSS Mode Controlling Marantz ComponentsControlling a Marantz Tape Deck Tape Mode Controlling a Marantz CD CD ModeControlling a Marantz Universal Dock AUX Mode Setting the Back Light Normal ModePreset Mode Resetting the CodeLearning Procedure Learn ModeErasing the code by buttons Erasing the all SourcesSymptom Cause Remedy TroubleshootingMemory backup HOW to Reset the UnitGeneral Malfunction HdmiOthers Surround ModeFront speakers Center speakerSource Direct AutoPure Direct EX/ESCSII-CINEMA, CSII-MUSIC, CSII-MONO DescriptionStereo VirtualDts Digital Surround 96/24 Dts Digital Surround ESAbout Dolby Pro Logic Cleaning of Equipment External Surfaces Technical SpecificationsRepairs RC004SR Setup Codes DSS DVDIs a registered trademark

SR4003 specifications

The Marantz SR4003 is a versatile home theater receiver that exemplifies the high standards of quality and performance for which Marantz is known. Designed specifically for audio enthusiasts, the SR4003 incorporates a range of advanced technologies and features that enhance the overall listening experience.

One of the standout features of the SR4003 is its robust amplification system. It delivers an impressive 100 watts per channel across seven channels, ensuring that even the most demanding audio signals are handled with ease. The receiver is also equipped with advanced circuitry that minimizes distortion, providing a cleaner and more dynamic sound. This makes the SR4003 an ideal choice for both music lovers and movie buffs alike.

The SR4003 supports a wide array of audio and video formats, including Dolby Digital, DTS, and signals up to 1080p. It features multiple HDMI inputs, allowing seamless connectivity with various high-definition devices such as Blu-ray players and gaming consoles. The inclusion of HDMI pass-through functionality gives users the convenience of switching between devices without having to change cables, all while maintaining high-quality video output.

Another noteworthy feature of the SR4003 is its multi-room capabilities. With zone 2 output, users can easily distribute audio throughout their home, allowing for separate listening experiences in different rooms. This is particularly useful for entertaining guests or having different family members enjoy their preferred media simultaneously.

Marantz has also placed a strong emphasis on user-friendly design in the SR4003. The intuitive interface, combined with an easy-to-navigate remote control, allows users to customize settings and configurations effortlessly. The built-in digital signal processing (DSP) features also provide users with multiple sound modes, ensuring an optimized experience for any type of content.

In terms of build quality, the SR4003 is a testament to Marantz's commitment to craftsmanship. Its robust chassis minimizes vibrations, while the high-grade components ensure durability and longevity. The aesthetic design features a sleek, timeless look that complements any home entertainment setup.

Overall, the Marantz SR4003 is a well-rounded home theater receiver that combines power, versatility, and premium sound quality. Its array of features makes it a powerful centerpiece for any audio or home theater system, catering to the demands of modern home entertainment. Whether for casual listening or immersive movie nights, the SR4003 delivers a truly exceptional audio experience.
Top Page Image Contents