Marantz SR4003 manual Preference, Surround, Error Indications During Measurement

Page 27

ENGLISH

NAMESAND FUNCTIONS

Notes:

• The measured speaker distance may differ from the

 

 

actual distance from speakers. Nevertheless, the

 

measured value is suitable for the speakers.

 

• To make changes to individual speakers, select 2.

 

SPEAKER SETUP on the SETUP MAIN MENU,

BASIC CONNECTIONS

then select MANUAL for 2-1 SPEAKER SETUP.

button to cancel measurement.

 

• The included microphone is designed specifically for

 

this receiver. Other microphones do not guarantee

 

suitable measurement results. Use the included

 

microphone to conduct measurements.

 

• During measurement, press the ENTER or EXIT

BASIC

• In some rooms, an error may occur during auto

speaker setup or it may not be possible to set Speaker

 

 

distance correctly because of room acoustics. In

OPERATION

such case, set the speaker distance by MANUAL

setup.

 

 

• Please set any THX Certified speakers manually

 

to “Small” and the crossover to “80 Hz” after Auto

 

setup operation.

ADVANCED CONNECTIONS

• When only HDMI components are connected, OSD

message is displayed on the monitor screen and

 

will not be displayed.

 

Error Indications During Measurement

 

If trouble occurs during measurement, an error

 

FL display. Those errors and their remedies are

 

described below. The message appearing on the FL

 

display is given in ( ).

SETUP

 

MIC SETUP ERROR (MIC SET ERROR)

 

 

The microphone (MC-10) is not properly connected.

 

→ Check the microphone connection.

 

AMBI NOISE ERROR (AMBI NOISE ER)

ADVANCED OPERATION

Measurement cannot be done correctly because of

excessive ambient noise.

→ Either temporarily turn off power to noisy

devices such as air conditioning or move them

out of the room.

→ Retry measurement when the room is quiet.

 

TROUBLESHOOTING

SPEAKER SET ERROR (SPK SET ERROR)

The speakers are not properly connected.

→ Recheck speaker layout and connections.

 

OTHERS

 

3 PREFERENCE

3 PREFERENCE

 

STANDBY MODE

: ECONOMY

TV-AUTO

:

OSD INFO

: ENABLE

VIDEO CONVERT

 

HDMI

: ENABLE

MAINEXIT

1. Select “PREFERENCE” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

2. To select a desired content, press the 3 or 4 cursor buttons.

STANDBY MODE:

When this function is set to “ECONOMY”, you can reduce the power consumption when the unit is in the standby mode.

Note:

TV-AUTO is disabled in the “ECONOMY” setting.

TV AUTO:

Select the TV AUTO ON/OFF function to enable or disable with the 1 or 2 cursor buttons.

OSD Info:

Select the OSD information function to enable or disable with the 1 or 2 cursor buttons.

If you select “ENABLE”, the unit will display the status of the feature (Volume up/down, input select, etc..) on the TV monitor. But if you do not desire this information, select “DISABLE”.

VIDEO CONVERT:

Select the VIDEO CONVERT function to enable or disable with the 1 or 2 cursor buttons. (Video cable connection: Refer to page 12)

3-1 VIDEO CONVERT

TV : ON

DVD : ON

VCR : ON

DSS : ON

AUX1 : ON

MAIN RETURN

EXIT

After you complete this portion of the set up, move the cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

HDMI AUDIO:

This setting determines whether to playback audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector.

ENABLE: The audio input to the HDMI jacks can be played back by this unit.

In such case, audio signals are not output to the TV or projector.

THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc.

4 SURROUND

4 SURROUND

SURR.MODE :AUTO

HT-EQ :OFF

LFE LEVEL :

MAINEXIT

1. Select “SURROUND” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

2. To select a desired content , press the 3 or 4 cursor buttons.

SURR.MODE:

Select the desired surround mode with the 1 or 2 cursor buttons.

HT-EQ:

Select to active the HT-EQ with the 1 or 2 cursor buttons.

The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.

Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance.

The HT-EQ feature is available except in the following modes.

•7.1 CH INPUT

•PURE-DIRECT

•SOURCE DIRECT

•When VIRTUAL is set for the surround mode

LFE LEVEL:

Select the output level of the LFE signal included in

the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the 1 or 2 cursor buttons.

After you complete this portion of the set up, move the cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents SR4003 Canadian ICES-003 La norme NMB-003 du Canada This Class B digital apparatus complies withRead Before Operating Equipment Important Safety InstructionsIntroduction Table of ContentsBefore USE FeaturesOperation of Remote Controller Remote ControlLoading Batteries Front AUX jack cover Names and FunctionsSurround FL Display and IndicatorDigital PCMRemote Controller Sleep button When AMP mode is selected Auto buttonWhen AMP mode and a mode other than DMP mode are selected Stereo buttonOutput 3AUDIO IN/OUT CD, TAPE, CD-R, TV, DVD, VCR, DSSMonitor OUT Component Video InputSpeaker Placement Basic ConnectionsHeight of the Speaker Units Loosen the knob by turning it counterclockwise Connecting SpeakersConnecting Speaker Wire Connecting a SubwooferConnecting Audio Components Connecting Digital Audio ComponentsComponent jack Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Video jackSelect an input source from the OSD menu system. See Connecting Hdmi ComponentsConnecting Hdmi Components Hdmi JackConnecting AN AM Outdoor Antenna Connecting the AC Power CableConnecting the Supplied Antennas Connecting AN FM Outdoor AntennaAMP Operation Basic OperationTuner Operation Manual TuningFM Tuning Mode Auto Stereo or Mono Using the unitDevice Remote Controller OperationConnecting Multi Channel Audio Component Connecting AN External Power AmplifierAdvanced Connections IR=DISABLE Connecting the Remote Control JacksOn Screen Display Menu System SetupSpeaker Setup Speaker SetupSpeakers Size Speakers Distance Speakers Level Setting with Test ToneHow to Operate MeasurementDisplay Status Error Indications During Measurement PreferenceSurround Music Parameter CH Input LevelCS Iicircle Surround II Parameter Recording AN Analog Source Display ModeAMP Operation Using the Sleep Timer Advanced OperationBypass → on → Bypass Listening Through HeadphonesDolby Headphone Mode Night ModeCH Input Attenuation to Analog Input SignalAuto Power on Auto Power OFFVideo Convert Video ON/OFFSurround Speaker B System → B → C ... Z → 1 → 2 → 3 .... → → + Clearing Stored Preset StationsSorting Preset Stations Name Input of the Preset StationControlling Marantz Components Controlling a Marantz TV TV ModeControlling a Marantz DVD DVD Mode Controlling a Marantz DSS DSS ModeControlling a Marantz CD CD Mode Controlling a Marantz Tape Deck Tape ModeControlling a Marantz Universal Dock AUX Mode Resetting the Code Normal ModeSetting the Back Light Preset ModeErasing the all Sources Learn ModeLearning Procedure Erasing the code by buttonsSymptom Cause Remedy TroubleshootingHdmi HOW to Reset the UnitMemory backup General MalfunctionCenter speaker Surround ModeOthers Front speakersEX/ES AutoSource Direct Pure DirectVirtual DescriptionCSII-CINEMA, CSII-MUSIC, CSII-MONO StereoDts Digital Surround ES Dts Digital Surround 96/24About Dolby Pro Logic Technical Specifications Cleaning of Equipment External SurfacesRepairs RC004SR Setup Codes DSS DVDIs a registered trademark

SR4003 specifications

The Marantz SR4003 is a versatile home theater receiver that exemplifies the high standards of quality and performance for which Marantz is known. Designed specifically for audio enthusiasts, the SR4003 incorporates a range of advanced technologies and features that enhance the overall listening experience.

One of the standout features of the SR4003 is its robust amplification system. It delivers an impressive 100 watts per channel across seven channels, ensuring that even the most demanding audio signals are handled with ease. The receiver is also equipped with advanced circuitry that minimizes distortion, providing a cleaner and more dynamic sound. This makes the SR4003 an ideal choice for both music lovers and movie buffs alike.

The SR4003 supports a wide array of audio and video formats, including Dolby Digital, DTS, and signals up to 1080p. It features multiple HDMI inputs, allowing seamless connectivity with various high-definition devices such as Blu-ray players and gaming consoles. The inclusion of HDMI pass-through functionality gives users the convenience of switching between devices without having to change cables, all while maintaining high-quality video output.

Another noteworthy feature of the SR4003 is its multi-room capabilities. With zone 2 output, users can easily distribute audio throughout their home, allowing for separate listening experiences in different rooms. This is particularly useful for entertaining guests or having different family members enjoy their preferred media simultaneously.

Marantz has also placed a strong emphasis on user-friendly design in the SR4003. The intuitive interface, combined with an easy-to-navigate remote control, allows users to customize settings and configurations effortlessly. The built-in digital signal processing (DSP) features also provide users with multiple sound modes, ensuring an optimized experience for any type of content.

In terms of build quality, the SR4003 is a testament to Marantz's commitment to craftsmanship. Its robust chassis minimizes vibrations, while the high-grade components ensure durability and longevity. The aesthetic design features a sleek, timeless look that complements any home entertainment setup.

Overall, the Marantz SR4003 is a well-rounded home theater receiver that combines power, versatility, and premium sound quality. Its array of features makes it a powerful centerpiece for any audio or home theater system, catering to the demands of modern home entertainment. Whether for casual listening or immersive movie nights, the SR4003 delivers a truly exceptional audio experience.
Top Page Image Contents