Inter-Tel 831.10507 With all local, state, and national electrical codes, Do not use soft water

Page 9

3. The hydrotherapy spa is designed to operate with either a 120 volt or a 240 volt power source. For your con-

venience, it comes

factory wired to accept a 120 volt power source.

The spa must be wired by a licensed,

qualified electrician directly to an approved Ground Fault Circuit Interrupter (GFCI) in compliance

with all local, state, and national electrical codes.

Before you have the spa wired, be sure that it is in the

position you want,

and that it can easily be serviced, if needed. For information on converting your spa to

240 volt operation see CONVERTING THE SPA TO A 240 VOLT POWER SOURCE on page 18.

4.Remove the two warning decals (not shown) from the spa shell. Wipe out the spa shell using a damp cloth. Before you fill the spa, make sure that it is in the desired position and that it can easily be ser- viced. Once the spa is filled with water, it must be drained before it can be moved.

Using a garden hose or other clean water source,

 

 

begin filling the spa.

Do not use soft water.

You

may fill the spa with cool water; however, if you use

 

warm or hot water, the spa will be ready to use

 

 

sooner. Fill the spa until the water is about four

 

 

inches (10 cm) below the console.

Do not overfill

the spa.

 

 

 

5.Place the Spa Cover (18) over the Spa Unit (15).

Make sure that the Spa Cover is centered.

Snap a Buckle (2) onto each of the four latches on the Spa Cover (18).

Pull down one of the straps on the Spa Cover (18)

and hold the Buckle (2) against the side of the Spa Unit (15). (Note: To position the Buckle correctly, have a second person hold the strap on the opposite

side of the Spa Cover tight.)

The Spa Cover must

be tight. Do not place the Buckle over the

grooves between the wood panels.

Refer to the

inset drawing. Remove the latch from the Buckle (2).

Attach the Buckle to the wood panel with two Buckle

Screws (1).

Note: It may be helpful to use a drill

with a 1/16” bit to make starter holes in the wood panel. It may also be helpful to apply a little soap or wax to the screw threads.

Attach the other three Buckles (2) to the wood panels in the same way.

Remove the Spa Cover (18) from the Spa Unit (15).

Before using the spa, carefully read USING THE

HYDROTHERAPY SPA beginning on page 11.

4

Fill to Here

5

Strap

Latch

2

15

1

18

15

Strap

2

6. Before using the spa, follow the instructions on page 10 to post the included warning sign.

Do not allow the

spa to be used before the warning sign is posted.

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents If you require Service for this QUESTIONS?Model No Serial No Limited Five Year Hydrotherapy SPA Warranty Table of ContentsImportant Safety Instructions Spa, and it will void the warrantyUse the hydrotherapy spa only as described This manual Minimum No AWG 1.3 mm Never use the hydrotherapy spa aloneHigh or low blood pressure, circulatory prob Volt Minimum Breaker/Fuse 15 Amps Before YOU Begin If you set up the hydrotherapy spa outside If you set up the hydrotherapy spa insideChoosing a Location for the Hydrotherapy SPA Hydrotherapy spa should be close to a source of waterOne 1 phillips screwdriver SET-UP and AssemblyDo not use soft water With all local, state, and national electrical codesSpa Make sure that the Spa Cover is centeredPosting the Warning Sign Testing the Ground Fault Circuit Interrupter Gfci Testing and Treating the WaterStarting the Hydrotherapy SPA Eight fixed thera-jets SPA Shell Diagram SPA OperationSuction vents Suction covers in placeTemperature Display Console DiagramUsing the Console Thermostat can be set to heat the water fromSecuring the SPA Cover Adjusting the Filter CycleLatch Buckle Key Attaching the RED and Blue Light CoversMaintenance Water Chemistry Maintaining the Proper PH BalanceDraining the Hydrotherapy SPA Draining the Pump Opening and Closing the CUT-OFF ValvesWinter USE and Care Converting the SPA to a 240 Volt Power Source Checking and Cleaning the FilterAdjusting the Filter Diverter Maintenance Notes Symptom the Pump Hums Symptom the SPA will not OperateTrouble -SHOOTING MustSymptom the Water Level Drops Minimum setting. Note If the water isSome water loss due to evaporation is normal Key No. Qty Description Part LIST-Model NoExploded DRAWING-Model No Ordering Replacement Parts Is a registered trademark of Icon Health & Fitness, IncPart No R1000A

831.10507 specifications

Inter-Tel 831.10507 is a powerful and versatile telecommunications solution designed to enhance business communication effectiveness. As part of the Inter-Tel product lineup, this device combines cutting-edge technology with user-friendly features, making it a preferred choice for many organizations.

One of the main characteristics of the Inter-Tel 831.10507 is its scalability. It supports growth by accommodating a varying number of users and can be easily expanded to meet the demands of a growing business. This scalability is particularly beneficial for small to mid-sized businesses that anticipate changes in their communication needs over time.

The device is equipped with robust voicemail capabilities. Users have access to a comprehensive voicemail system that offers personalized greetings, message storage, and retrieval options. This feature ensures that important messages are never missed, allowing businesses to maintain a high level of customer service.

In terms of connectivity, the Inter-Tel 831.10507 supports multiple communication protocols, including analog, digital, and Voice over Internet Protocol (VoIP). This extensive compatibility allows businesses to integrate the system into their existing communication infrastructure seamlessly. As a result, organizations can take advantage of both traditional and modern communication methods.

Another noteworthy feature is its call management capabilities. The Inter-Tel 831.10507 includes call forwarding, call waiting, and conference call functionalities. These features empower users to manage their calls efficiently and facilitate smoother collaboration among team members.

The system also boasts a user-friendly interface, making navigation intuitive. Users can easily configure settings, manage contacts, and access features without extensive training or technical knowledge. This ease of use reduces the time and resources spent on training staff, allowing them to focus on their core responsibilities.

Security is a critical concern for any business communication system, and the Inter-Tel 831.10507 addresses this by implementing various security protocols. These measures protect sensitive information and ensure that communications remain confidential.

Moreover, the device is designed for reliability. With a proven track record in various operational environments, it is built to withstand the challenges of day-to-day business activities.

In conclusion, the Inter-Tel 831.10507 is a sophisticated communication tool that combines scalability, advanced features, and user-friendliness. Whether for a startup or a more established company, it provides the flexibility and functionality required to enhance organizational communication, making it a worthwhile investment. By adopting this telecommunications solution, businesses can significantly improve their overall communication efficiency and effectiveness.
Top Page Image Contents