Inter-Tel 831.10507 user manual Draining the Pump, Opening and Closing the CUT-OFF Valves

Page 17

To drain the hydrotherapy spa, follow these steps:

1.Set the water temperature to the lowest setting.

2.Shut off the circuit breaker or GFCI.

3.Remove the access cover from the spa.

4.Remove the drain hose from the clip and attach a garden hose to the valve on the drain hose.

Knob

 

 

Cap

Valve

Drain Hose

 

 

5.Open the valve by turning the knob counterclock- wise. The water will begin to drain.

6.When the spa is empty, close the valve and

remove the garden hose. Return the drain hose to the clip and replace the access cover.

7.Refill the spa and treat the water with chemicals (see pages 9, 11, and 16).

DRAINING THE PUMP

After the hydrotherapy spa is drained (see DRAINING THE HYDROTHERAPY SPA on page 16), the pump

in the spa jet unit should also be drained if the hydrotherapy spa will be stored for more than thirty days or if it may be exposed to freezing tempera- tures.

To drain the pump,

 

first remove the

Pump

access cover from the

 

spa (see ATTACHING

 

AND REMOVING

 

THE ACCESS

 

COVER on page 16).

Drain Plug

Locate the pump

 

inside the spa unit.

 

Remove the drain plug from the pump. Tip the spa jet

unit slightly until all the water has drained from the

pump. Replace the drain plug.

 

OPENING AND CLOSING THE CUT-OFF VALVES

For minor repairs to the pump or motor, the cut-off valves can be closed (see the drawing at the top of the next column). To close the valves, first remove the access cover from the spa. Locate the two cut-off valves. Push the handles into the closed position and turn the handles until they lock into place.

Cut-off

Valve

Cut-off

Valve

If you are planning to work on the pump or motor, you will also need to drain the pump (see this page).

To open the valves, turn the handles until they are unlocked and then pull the handles out to the open position.

WINTER USE AND CARE

The hydrotherapy spa is designed for year-round use.

If you decide to store the spa for the winter, store it in a warm, dry location. Follow the steps below to win- terize the spa.

1.Drain the spa (see DRAINING THE HYDROTHERAPY SPA on page 16).

2.Remove all remaining water from the spa shell. Dry the spa shell with towels.

3.Set the air control on the console to the lowest setting. Use a wet/dry vacuum to pull any remain- ing water from the system. To do this, place the vacuum nozzle over each thera-jet, starting with the highest jet and finishing with the lowest one.

4.Set the air control on the console to the highest setting and repeat step 3.

5.Drain the pump (see DRAINING THE PUMP on this page). Once the water has drained from the pump, place the vacuum nozzle over the drainage hole in the pump and vacuum any addi-

tional water from the pump.Note: For additional

protection you can remove the pump/motor

from the spa to store it in a climate controlled room.

6.Clean the spa shell (see page 15).

7.Clean the filter (see page 18).

8.A qualified electrician should disconnect the power cord from the 240 volt power source if so wired.

9.Re-attach the access cover and re-attach the spa cover.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model No Serial No If you require Service for thisQUESTIONS? Limited Five Year Hydrotherapy SPA Warranty Table of ContentsUse the hydrotherapy spa only as described This manual Important Safety InstructionsSpa, and it will void the warranty High or low blood pressure, circulatory prob Minimum No AWG 1.3 mmNever use the hydrotherapy spa alone Volt Minimum Breaker/Fuse 15 Amps Before YOU Begin If you set up the hydrotherapy spa outside If you set up the hydrotherapy spa insideChoosing a Location for the Hydrotherapy SPA Hydrotherapy spa should be close to a source of waterOne 1 phillips screwdriver SET-UP and AssemblyDo not use soft water With all local, state, and national electrical codesSpa Make sure that the Spa Cover is centeredPosting the Warning Sign Starting the Hydrotherapy SPA Testing the Ground Fault Circuit Interrupter GfciTesting and Treating the Water Eight fixed thera-jets SPA Shell Diagram SPA OperationSuction vents Suction covers in placeTemperature Display Console DiagramUsing the Console Thermostat can be set to heat the water fromSecuring the SPA Cover Adjusting the Filter CycleLatch Buckle Key Attaching the RED and Blue Light CoversMaintenance Draining the Hydrotherapy SPA Water ChemistryMaintaining the Proper PH Balance Winter USE and Care Draining the PumpOpening and Closing the CUT-OFF Valves Adjusting the Filter Diverter Converting the SPA to a 240 Volt Power SourceChecking and Cleaning the Filter Maintenance Notes Symptom the Pump Hums Symptom the SPA will not OperateTrouble -SHOOTING MustSome water loss due to evaporation is normal Symptom the Water Level DropsMinimum setting. Note If the water is Key No. Qty Description Part LIST-Model NoExploded DRAWING-Model No Part No R1000A Ordering Replacement PartsIs a registered trademark of Icon Health & Fitness, Inc

831.10507 specifications

Inter-Tel 831.10507 is a powerful and versatile telecommunications solution designed to enhance business communication effectiveness. As part of the Inter-Tel product lineup, this device combines cutting-edge technology with user-friendly features, making it a preferred choice for many organizations.

One of the main characteristics of the Inter-Tel 831.10507 is its scalability. It supports growth by accommodating a varying number of users and can be easily expanded to meet the demands of a growing business. This scalability is particularly beneficial for small to mid-sized businesses that anticipate changes in their communication needs over time.

The device is equipped with robust voicemail capabilities. Users have access to a comprehensive voicemail system that offers personalized greetings, message storage, and retrieval options. This feature ensures that important messages are never missed, allowing businesses to maintain a high level of customer service.

In terms of connectivity, the Inter-Tel 831.10507 supports multiple communication protocols, including analog, digital, and Voice over Internet Protocol (VoIP). This extensive compatibility allows businesses to integrate the system into their existing communication infrastructure seamlessly. As a result, organizations can take advantage of both traditional and modern communication methods.

Another noteworthy feature is its call management capabilities. The Inter-Tel 831.10507 includes call forwarding, call waiting, and conference call functionalities. These features empower users to manage their calls efficiently and facilitate smoother collaboration among team members.

The system also boasts a user-friendly interface, making navigation intuitive. Users can easily configure settings, manage contacts, and access features without extensive training or technical knowledge. This ease of use reduces the time and resources spent on training staff, allowing them to focus on their core responsibilities.

Security is a critical concern for any business communication system, and the Inter-Tel 831.10507 addresses this by implementing various security protocols. These measures protect sensitive information and ensure that communications remain confidential.

Moreover, the device is designed for reliability. With a proven track record in various operational environments, it is built to withstand the challenges of day-to-day business activities.

In conclusion, the Inter-Tel 831.10507 is a sophisticated communication tool that combines scalability, advanced features, and user-friendliness. Whether for a startup or a more established company, it provides the flexibility and functionality required to enhance organizational communication, making it a worthwhile investment. By adopting this telecommunications solution, businesses can significantly improve their overall communication efficiency and effectiveness.
Top Page Image Contents