Shindaiwa 68002-94310 manual

No performance guarantee without using
genuine Shindaiwa blades.
No-load revolution speed: 4180 min
-1
(rpm)
Use reinforced abrasive blades with maximum
useable perimeter velocity of 248 ft/sec.
USE ONLY GENUINE
SHINDAIWA BLADES
EC7500
Maximum blade diameter: 12 in.
Maximum blade thickness: 0.16 in.
Arbor diameter: 1 inch
SHINDAIWA OWNER’S AND
OPERATOR’S MANUAL
EC7500/EC7600
ENGINE CUTOFF
SAW
WARNING!
■Read this manual and familiarize yourself with its contents.
■This unit is designed primarily for cutting construction materials and metal
according to the type of cutting wheel installed.
■To minimize the risk of injury to yourself and others, always wear hearing
protection, a dustproof mask, goggles and a helmet when operating this unit.
■Keep this manual handy so you can refer to it when required.
Part Number 68002-94310 Rev. 12/02
(EPA VERSION)
Shindaiwa Inc.
11975 SW Herman Road
Tualatin, Oregon 97062
Telephone 503-692-3070
Fax 503-692-6696
www.shindaiwa.com
Shindaiwa Kogyo Co., Ltd.
6-2-11 Ozuka-Nishi
Asaminami-Ku, Hiroshima
731-3167, Japan
Telephone 81-82-849-2220
Fax 81-82-849-2481
©2002 Shindaiwa Inc.
Part Number 68002-94310
Shindaiwa is a registered
trademark of Shindaiwa Inc.