Invacare I-Transia 250 kg user manual Safe Maintenance, Maintenance and Safety Inspection

Page 23

Maintenance

8 Maintenance

8.1 Safe Maintenance

WARNING!

Regular maintenance of patient lifts and accessories is necessary to assure proper operation.

–Maintenance MUST be performed only by a certified technician.

8.2Maintenance and Safety Inspection

Service Interval

At normal daily operation, a service check-up should take place every year, according to the Safety Inspection Checklist in the Service Manual. When performing annual or regular maintenance, all parts designed to carry load must be, as a minimum, tested with load. All safety features must be checked according to EN ISO 10535:2006 Annex B. This inspection must be performed by a certified technician.

LOLER Statement

The UK Health and Safety Executive’s Lifting Operations and Lifting Equipment Regulations 1998, require any equipment that is used in the workplace to lift a load be subject to safety inspection on a six monthly basis. Please refer to the HSE web site for guidance www.hse.gov.uk.

The person responsible for the equipment must ensure adherence to LOLER regulations.

General Maintenance

Follow the maintenance procedures described in this manual to keep your patient lift in continuous service.

The hoist is designed to provide a safe, efficient and satisfactory service with minimum care and maintenance.

It is important to inspect slings, hanger bar, carabiner and lifting strap for signs of cracking, fraying, deformation or deterioration. If damage is found, DO NOT use. Contact your Invacare dealer IMMEDIATELY.

If you question the safety of any part of the lift, contact your Invacare dealer immediately and advise him/her of your problem.

Replacement of parts must only be performed by a certified technician.

1183377-B

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Invacare Transia Page Contents Intended Use SymbolsGeneral Information panel on the I-Transia bottom surface Service Life FeaturesConditions for Use General SafetyGeneral Guidelines Operating InformationRisk of Injury Pinch Points and PositioningRadio Frequency Interference Power SupplyLoad Limits Hoist Power supplyProduct Labeling Hand control Hanger Bar Included Items SetupInstalling the Hanger Bar Before Use Before Use Operating the Hoist Indicator lamps and audio signalsOperation Emergency stop and lowering strap Charging the BatteryEmergency stop Emergency lowering Resetting the emergency stop Attaching the Sling Lifting the PatientSling Information Lifting to and from a lying position Lifting InformationLifting to and from a seated position Disposal Packaging Storage Condition SymbolAfter Use Transport and StorageEnvironmental Policy Statement Troubleshooting Table TroubleshootingService Interval Loler Statement MaintenanceSafe Maintenance Maintenance and Safety InspectionCleaning and Disinfecting the Hoist Cleaning the Sling and HoistSafety Inspection Checklist Cleaning the SlingTypical Product Parameters Technical DataElectronics DimensionsSafety Limited Warranty North America WarrantyLimited Warranty Europe Page Page Page USA Invacare Corporation ManufacturerEU Representative

I-Transia 250 kg, I-Transia 205 kg) specifications

The Invacare I-Transia series, which includes models capable of lifting 205 kg and 250 kg, represents a significant advancement in mobility assistance technology. Designed for individuals with varying levels of mobility, these innovative floor lifts prioritize safety, comfort, and efficiency.

One of the main features of the I-Transia series is its robust lifting capacity. The 205 kg model is ideal for a wide range of users, while the 250 kg version caters to those requiring additional support, making it suitable for heavier individuals. This impressive capacity enables caregivers to assist a diverse population, enhancing the inclusivity of mobility solutions.

The I-Transia lifts are equipped with advanced electronic controls, allowing caregivers to operate the device with ease. The intuitive joystick interface or push-button controls facilitate smooth and precise movements, ensuring a seamless transfer experience for users. The lifts also include programmable settings that support personalized care routines, meeting the unique needs of each user.

Safety is paramount in the design of the I-Transia series. Both models feature a range of safety mechanisms, including automatic overload protection systems that prevent potential accidents during operation. Additionally, the lifts come with secure, adjustable straps to ensure that users are safely positioned throughout the lifting process.

Another notable characteristic of the I-Transia lifts is their exceptional maneuverability. Designed with a compact footprint and tight turning radius, these lifts can easily navigate through narrow spaces and doorways, making them suitable for home environments, care facilities, and hospitals alike. The durable wheels are engineered for smooth movement, further enhancing user comfort during transfers.

The sturdy construction of the I-Transia series is complemented by lightweight materials, making them easy to transport and store when not in use. The user-friendly design also incorporates a low-maintenance philosophy, minimizing the need for regular maintenance checks and ensuring reliability.

Overall, the Invacare I-Transia 205 kg and 250 kg models set a new standard in patient mobility solutions. Their combination of high lifting capacities, advanced technology, and user-centric design makes them an excellent choice for both caregivers and users, fostering independence while ensuring safety and comfort. With these lifts, Invacare continues to demonstrate its commitment to improving the quality of life for those with limited mobility.
Top Page Image Contents