Little Wonder 6232 manual User Maintenance Instructions

vered "wheelbarrow fashion."

USER MAINTENANCE

INSTRUCTIONS

1.Keep all nuts, bolts and screws tight.

2.Never store the machine filled with fuel inside a building or in a confined space where fumes may be susceptible to sparks or an open flame.

3.Refer to the instructions manual for important details if the product is to be stored for an extended period of time.

4.Check the tightness of the blade nut prior to each use.

5.Prior to each use, lubricate cutter head shaft (P/N 131), cutter head bracket (P/N l00-C), and key (P/N 138) at slip rotation points every 8 hours

6.Prior to each use, check to see that set screws on pulley are tight, and guards are in place.

NOTE: The belt guard is an important safety feature and is vital to the proper operation of the edger.

7.Grease cutter head every 25 hours. Use Lithium #0 grease (P/N 4042). Add grease until grease starts to squeeze through the bearing.

!	CAUTION	!	Loose set screws can cause
			damage to shaft and pulley.
▲		▲

Improper maintenance will void warranty.

WARNING: The engine on your Pro Honda Edger is not equipped with a spark arrester and if machine is to be used on any forest-covered, brush-covered, or grass-covered unimproved land, before using on such land a spark arrester must be added to the muffler. The arrester must be maintained in effective working order by the operator. In the State of California, the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See your Authorized Honda Service Center for spark arrester muffler options.

NOTE: The belt guard is vital to the proper operation of the edger. The belt guard is not just a safety feature!

Fig. 5

10