THROTTLE INSTALLATION
INSTRUCTIONS
1.Remove the air filter cover from the engine.
2.Use a 10mm socket to loosen the throttle lever pivot nut.
3.Move the remote throttle lever so that the center of the lever is lined up with the turtle’s tail.
4.Move the engine throttle lever to the slow posi- tion (push throttle lever to the front of the edger).
5.Remove the throttle cable retaining clamp and screw from the engine.
Fig. 4
6.Insert the end of the throttle cable into the hole on the engine throttle lever.
7.Place the
8.Replace the air filter cover.
9.The remote throttle lever should move from slow to fast and be approximately centered in its slot.
10.If the throttle feels tight, loosen the engine throttle lever pivot nut.
11.If the throttle does not stay where it is placed, tighten the remote throttle lever pivot nut (key # 63).
WARNING - ALL LITTLE WONDER EDGERS ARE SHIPPED WITHOUT OIL. WHEN FILLING OIL -
Use SAE 30 Oil. REFER TO ENGINE MANUFACTURES INSTRUCTION MANUAL
FOR PROPER ENGINE OPERATION INSTRUCTIONS
8
