Little Wonder 6232 manual Handle Gas With Care It Is Highly Flammable

22. IF BLADE STRIKES A FOREIGN OBJECT, FOLLOW THESE STEPS:

a) Stop the engine.

b) Disconnect the spark plug lead. c) Inspect for any damage.

d) Repair any damage before restarting and operating the machine.

23. DISENGAGE THE BLADE AND/OR STOP THE ENGINE WHEN THE MACHINE IS TRANSPORTED OR NOT IN USE.

ENGINE INDOORS

-

Exhaust flames are dangerous The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

▲! WARNING ▲!

21. DO NOT RUN THE

19. START THE ENGINE CAREFULLY. Keep hands, feet, clothing and the like well away from blade and moving parts.

20. NEVER ATTEMPT TO MAKE ADJUST- MENTS while the engine is running, except to the carburetor.

18. To reduce the risk of fire, replace gasoline cap securely.

15.STORE MACHINE INDOORS - When not in use, store indoors in a dry place, locked or otherwise inaccessible to children.

16.DO NOT ATTEMPT TO REPAIR MACHINE - Have repairs made by qualified dealer or repairman. Use only original Little Wonder replacement parts.

17.HANDLE GAS WITH CARE; IT IS HIGHLY FLAMMABLE.

a)Use a gas container acceptable for the purpose and do not store gas in the house.

b)Never add gas to a running or hot engine.

c)Fill gas tank outdoors with extreme care. Never fill gas tank indoors.

d)Replace gas cap securely.

e)If gas is spilled, move Edger and gas container from area and do not create a source of ignition.

▲! CAUTION ▲!

24.STOP THE ENGINE WHEN LEAVING THE MACHINE UNATTENDED.

25.WHEN CLEANING, REPAIRING, OR INSPECTING, make certain the blade and all mov- ing parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug so that unintentional starting does not occur.

26.NEVER OPERATE THE MACHINE without guards or other productive devices in place. Before each use, check all fasteners and safety devices for proper function.

27.MULTIPLE OPERATORS - Keep a safe distance between two or more operators when working together simultaneously.

28.BE SURE MACHINE IS FULLY ASSEMBLED - Never operate without all guards and deflectors in place. Ensure that all nuts, bolts, screws are installed and properly tightened. Check pulley set screws and all fasteners for tightness and lubricate cutter head shaft, key, keyway and bushings with light oil prior to each use.

29.ALWAYS KEEP THE THROTTLE IN THE “STOP” POSITION WHEN NOT IN USE.

30.LABELS SHOULD BE INSPECTED BEFORE EACH USE. Replace damaged labels immediately. See Safety Decal Identification on page 4.

3