Invacare Model, 3752G user manual General Guidelines, Important Safety Information

Page 6

2 SAFETY

2 Safety

The Safety section contains important information for the safe operation and use of this product.

2.1General Guidelines

￿

￿

!

WARNING

DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occur.

ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

NOTICE

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

2.2Important Safety Information

￿

￿

DANGERS - ELECTRICAL SHOCK HAZARD

Grounding is required.

The installation and maintenance of the tub MUST be done by a qualified technician, certified electrician or plumber. Disconnect electrical supply or turn off circuit breaker before installing or performing any maintenance on the tub. The unit MUST be connected only to a supply circuit that is protected by a ground fault circuit-interrupter (GFCI). Be certain ALL electrical work is performed by a qualified electrician and is in compliance with local electrical codes. ALL electrical connections are to be water resistant.

DANGER - RISK OF SCALDING

The hot water supply to the tub MUST not exceed 110°F (43° C) to protect the user from scalding.

Invacare® TheraPure™ Recessed Whirlpool Tubs

6

Part No. 1167458

Image 6
Contents Page Contents Operating Instructions Symbols and Signal Words GeneralLimited Warranty Safety Important Safety InformationGeneral Guidelines Safety Features Model 3802G OverviewModel 3752G Product Labeling Typical Product Parameters 3752G 3802G 3752G or 3802G Recessed TUB Dimensions Models 3752G or 3802G Installation One wall installation Two wall installation corner Preparing the Work AreaElectrical and Plumbing Hook-up Locations Front View Model 3752GTop View Model 3752G Electrical Installation Plumbing Installation Post Installation Checklist Optional Pressure Regulator Tub SpoutOperating Instructions OverviewCleaning and Disinfecting Detail a Detail B Replace the impeller and impeller cap on each jet assembly Removing Soap Film and Hard Water DepositsRemoving Calcium Deposits, Scale and Lime Build-up Opening/Closing the Tub Door Opening the Tub DoorClosing the Tub Door Door Handle Safety Pin Installation Waist StrapUse Water Temperature Setting Using the Shower/Massage Wand Filling the TubUsing the Whirlpool Function Initially Inspection and TroubleshootingSafety Inspection Checklists Before Each UseTroubleshooting Symptoms Faults SolutionMaintenance Record Date Maintenance Person Type of Maintenance PerformedInvacare TheraPure Recessed Whirlpool Tubs Invacare TheraPure Recessed Whirlpool Tubs USA and Canada Manufacturing Location