Starting the Engine

NOTE: The lawn tractor is equipped with a safety starting system that requires the mower clutch control lever to be in the disengaged position and the clutch-brake pedal depressed all the way before the starter will turn the engine.

The following steps should be taken to start the engine.

1.Be sure the speed control lever is in NEUTRAL. Speed control lever will not return to neutral when the clutch-brake pedal is depressed.

2.The clutch-brake pedal must be depressed all the way down and the mower clutch lever must be in the disengaged position to actuate the safety starting switch.

Move the choke and throttle control lever to the "Choke" position when the engine is cold. Little or no choking is required when the engine iswarm.

4.Turn ignition key clockwise to the start position and release it as soon as the engine starts. Do not operate the starter more than 30 seconds at any one time. If engine does not start within this time,

turn the key off and wait a few minutes, then tryagain.

After the engine starts, slowly move the choke and throttle control lever to the "F AST" position.

Clutch-Brake Pedal

The combination clutch-brake pedal is used to disengage the engine from the hydrostatic drive and to actuate the brake to stop the tractor.

To disengage the clutch, and apply the brake, press the pedal all the way down.

STOPPING THE ENGINE

Set the speed control lever in "NEUTRAL" and set the mower clutch lever in the "OFF" positon to disengage the mower. Allow the engine to idle a few minutes before turning the ignition key to the 'OFF" position.

CAUTION! Remember -A careful operator is the best insurance against an accident. Know the controls and how to

stop quickly. READ THE OPERATOR'SMAN

NOTE: To obtain the best service from the lawn tractor, for the first few hours of operation avoid

rapid engagement of the mower clutch and main

drive clutch.

After starting the engine:

1.Depress the clutch-brake pedal and release the brake lock, then release the clutch.

Set the throttle control on "FAST".

3.Engage the mower blades by moving the power take-off control lever SLOWLY forward to the "ON" position. To stop the mower pull the lever back to the "a F F" position.

Set the lift handle at the desired cutting height.

5.To start the lawn tractor in motion, move the speed control lever forward to obtain the proper speed to control the machine, and to obtain an even cut. As conditions vary, this can best be determined after you become familiar with the tractor, type of grass, condition of the lawn, climate, and individual preference, etc.

NOTE: It is recommended that to start the tractor in motion and to change speed and direction, use ON L Y the speed control handle. The clutch brake pedal can be used to stop the machine, but machine operates more effectively by engaging the clutch with the speed control in neutral and then move the speed control handle to put the machine in motion.

23.4

Cadet 80 specifications

The International Home Products Cadet 80 is a standout model in the realm of energy-efficient heating solutions. Designed with the modern consumer in mind, this electric wall heater combines functionality, aesthetics, and reliability. Its sleek design allows it to fit seamlessly into any home decor, making it a versatile addition to varied spaces, whether in residential or commercial settings.

One of the primary features of the Cadet 80 is its compact size, which enables it to be installed in tight spaces without compromising performance. The heater's slim profile allows for discreet placement, ensuring that it complements rather than detracts from the room's appearance. With a capacity of 800 watts, this model is ideal for heating small to medium-sized rooms, delivering consistent warmth during colder months.

The Cadet 80 is equipped with advanced technologies that enhance user experience and efficiency. It incorporates an easy-to-use adjustable thermostat that allows homeowners to set their desired temperature with precision. This feature not only maximizes comfort but also contributes to energy savings, as the system can automatically adjust its output based on the room’s heating needs.

Another hallmark of the Cadet 80 is its safety features. The heater includes a built-in overheat protection mechanism, providing peace of mind for users. This feature automatically shuts off the unit if it becomes too hot, preventing potential hazards and ensuring safe operation. Furthermore, the durable, heavy-duty construction of the Cadet 80 ensures longevity, withstanding the rigors of daily use.

Additionally, the easy installation process of the Cadet 80 is worth noting. The unit can be hardwired directly into the electrical system, making it suitable for permanent installation in various settings. This eliminates the need for cumbersome cords and allows for a cleaner aesthetic.

In summary, the International Home Products Cadet 80 electric wall heater stands out for its compact design, efficient heating capacity, user-friendly controls, and emphasis on safety. For those seeking a reliable and stylish heating solution for small to medium rooms, the Cadet 80 presents an excellent choice, merging modern technology with practical features that enhance comfort and convenience.