Marantz SR4002/SR5002 manual Connecting Hdmi Components, Hdmi Jack

Page 24

CONNECTING HDMI COMPONENTS

HDMI JACK

This unit has 3 HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed.

Select an input source from the OSD menu system. (See page 27)

Notes:

•When the HDMI output is connected to a display monitor that does not support HDCP*, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP*.

•There may be no image output if connected to a TV or display that is not compatible with the above format.

•Refer to the instruction manual of the TV or display to be connected to the unit for detailed information regarding the HDMI terminal.

*HDCP: High-bandwidth Digital Content Protection

CONNECTING HDMI COMPONENTS

An HDMI cable (sold separately) is used to connect the HDMI jack on the unit with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack.

HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI terminal using an HDMI-DVI conversion cable or plug. When connecting to a DVI terminal, connect the audio signal separately.

Notes:

•Some HDMI components can be controlled over the HDMI cable, but this unit cannot control other components this way.

•When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output.

•DVI cables come with 24-pin and 29-pin plugs. This unit supports 24-pin DVI-D cables; 29-pin DVI cables cannot connect to it.

•Some source devices such as DVD players does not support HDMI repeater like those of the unit. In such case, pictures are not properly projected on monitors such as TVs and projectors.

•When multiple components are connected to this unit, turn power to unused components off to prevent interference between them.

•Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables.

•Some DVD-Audio disks disable downmixing. These types of disks are not played back correctly unless the left, center, right and surround left and right speakers, and subwoofer are connected.

•If a DVD player that does not support HDMI 1.1 is connected to the unit, multi channel PCM playback is not possible even with DVD-Audio disks.

•If a DVD player or other device with DVI output is connected to the unit, a separate audio cable (optical- digital, coaxial digital or analog) is needed for the audio signals. In this case, select the connected audio input as explained in “1 INPUT SETUP”. (See page 27)

•Multi channel PCM signals and audio signals of 64 kHz or higher that are input from the HDMI jack are not output from the DIGITAL OUT jacks.

•Depending on the quiality of the cable used, the HDMI signal may be affected by noise.

•Audio units that use sampling frequencies of 128 kHz and above are not supported.

•When only HDMI components are connected, OSD will not be displayed. (See page 26)

DVD player

VIDEO PROJECTOR

ENGLISH

HDMI OUTPUT

HDMI INPUT

 

 

 

 

 

INPUT

 

 

 

 

 

COMPONENT

 

 

 

HDMI Ver 1.1

 

 

 

1

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

3

VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT 2

 

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

INPUT 1

INPUT 2

INPUT 3

OUTPUT

CR IN VCR OUT

DSS

MONITOR OUT 2 Y

CB/PB

CR/PR

Y

CB/PB CR/PR

Y

CB/PB

CR/PR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

 

XM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

 

 

 

 

 

 

 

IN

OUT

 

IN

OUT

IN

OUT

 

 

OPT

OUT

FLASHER

DC

 

 

 

 

VCR

DSS

TAPE

CD/CDR

DIGITAL IN

 

DIGITAL OUT REMOTE CONT.

IN

TRIGGER

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

 

R

L

R

L

R

L

 

 

 

 

 

 

 

 

 

R.

FRONT A

SURROUND BACK

SURROUND

CENTER

 

 

SWITCHED

 

 

 

 

 

 

 

SPEAKER C/MULTI SPEAKER

 

 

SPEAKER

 

 

1.25A 150W

 

MODEL NO. SR5002

 

 

MS

 

SURR.SURR BACK : 6-8 OHMS

 

SYSTEMS

 

 

AC OUTLETS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

120V60Hz

Satellite Tuner

HDMI OUTPUT

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model SR4002/SR5002 User Guide Read Before Operating Equipment AC Polarized PlugNEC National Electrical Code Introduction Table of Contents Features DescriptionAbout Dolby Pro Logic XM Satellite Radio ReadyOperation of Remote Controller Before USENames and Functions Front Panel SR4002AUDIO/ Video Front Panel SR5002@4 Setup MIC jack Mode buttonATT Attenuate button AUX1 Input jacksFL Display and Indicator Rear Panel SR4002 TV, DVD, VCR, DSSRear Panel SR5002 4AUDIO IN/OUT CD, TAPE, CD-R, TV, DVD, VCR, DSS 5DIGITAL Input6HDMI INPUT/OUTPUT 8FLASHERRemote Controller ¤6 Volume +/- buttons ¤0 P.DIRECT button¤1 BAND/LIP SYNC/INPUT button ¤2 T.MODE buttonRemote Control Operation General Information of Remote Controller to the UnitAMP Mode Tuner ModeControlling a Marantz VCR VCR Mode Controlling Marantz ComponentsControlling a Marantz Tape Deck Tape Mode Rewind / Forward Searchs forward or backwardControlling a Marantz Universal Dock AUX1 Mode Cursor DownBasic Operation Learn Mode Learning ProcedureErasing the code by buttons Erasing the all SourcesSpeaker Placement Connecting SpeakersConnecting Speaker Wire ConnectionsConnecting a Subwoofer Connecting Digital Audio ComponentsConnecting Video Components VIDEO, S-VIDEO , Component JacksThere are 3 types of video jacks on the rear panel Video jackConnecting Hdmi Components Connecting Hdmi ComponentsHdmi Jack Select an input source from the OSD menu system. SeeConnecting the Remote Control Jacks Connecting Multi Channel Audio SourceConnecting AN External Power Amplifier Connecting the Antenna Terminals Connecting the Supplied AntennasConnecting AN FM Outdoor Antenna Connecting AN AM Outdoor AntennaConnecting the XM CONNECT-AND-PLAY Antenna How to SubscribeSee the Checking the XM Signal Strength and Radio ID XM Radio Overview SR5002 onlyConnecting for the Multi Room SR5002 only This allows you to drive the treble and bass unitsBi-amp Connection Connecting Other Equipment RS232CSetup On Screen Display Menu SystemSpeaker Setup Input Setup Assignable DigitalSpeaker Setup Input and Component Video InputSpeakers Distance How to Operate MeasurementError Indications During Measurement PreferenceSurround CH Input Level Multi Room SR5002 onlyPL Iipro Logic II Music Parameter CS Iicircle Surround II ParameterSimple Setup Relation of the speakers number and conectted speakerRelation of the room size and floor space Basic Operation Video Convert SR5002 onlySR4002/SR5002 Surround Mode Front speakersCenter speaker SL/SR Surround speakersAuto Source DirectPure Direct EX/ESCircle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONO StereoVirtual Multi CH. STDisplay Mode Other FunctionRecording AN Analog Source Selecting Analog Audio Input or Digital Audio InputListening Through Headphones Dolby Headphone ModeAttenuation to Analog Input Signal Speaker A/BAUX2 Input HT-EQ Home Theater EqualizerTV Auto ON/OFF Function LIP.SYNC SR5002 onlyPreset Memory Listening to the TunerRecalling a Preset Station Preset ScanClearing Stored Preset Stations Sorting Preset StationsChecking the XM Signal Strength and Radio ID Switching XM Information in the Front Panel DisplayUsing the SR5002 Listening to XM Satellite RadioSearch Mode ALL Channel Search ModeWhen the channel Artist name/Song title is displayed When the channel category is displayedCategory Search Mode Channel Direct CallChecking the XM Preset Channel Preset channel can be checked on the on screen displayYou can remove preset stations from the memory Using the following procedureMulti Room Playback Using the Multi Multi indicator on the front panel will be turned offMulti Room Room OUT TerminalsAnother Room Playback Using Surround Speaker B Terminals Volume of S. Speaker B is interlocked with the main volumeTroubleshooting Symptom Cause RemedyHdmi HOW to Reset the Unit Memory backupXM Satellite Radio Front KEY Button Lock of the UnitTechnical Specifications 1110, 1113, 1133, 1136 Video Concepts1128, 1129, 1130 1010, 1069, 1073, 1111 1138, 1143, 11453056, 3068, 3069 3026, 3029, 30323052, 3060, 3067 3040, 3048, 3067, 30724002, 4008, 4009 Is a registered trademark

SR4002/SR5002 specifications

The Marantz SR4002 and SR5002 are two remarkable home theater receivers that deliver exceptional audio performance, making them stand out in the crowded market of AV receivers. Both models are designed for audiophiles and home theater enthusiasts who demand superior sound quality, versatility, and advanced features.

The SR4002, known for its robust build and high-quality components, provides 100 watts of power per channel, ensuring dynamic sound reproduction for a variety of media. This model supports a wide range of audio formats, including Dolby Digital, DTS, and PCM, enabling an immersive surround sound experience. It features multiple inputs and outputs, including HDMI, allowing seamless connectivity to a multitude of devices such as Blu-ray players, gaming consoles, and streaming devices. The SR4002 also includes a built-in AM/FM tuner, giving users the flexibility to enjoy their favorite radio stations.

On the other hand, the SR5002 takes it a step further with its enhanced specifications and features. With 110 watts of power per channel, it caters to larger home theaters without sacrificing sound quality. One of the standout features of the SR5002 is its advanced audio processing technology, which ensures precise sound staging and clarity in complex audio environments. The addition of Audyssey MultEQ room calibration technology helps automatically adjust the receiver's settings based on the acoustic characteristics of the room, optimizing audio performance for an unparalleled experience.

Both models boast a sleek design that fits seamlessly into any home entertainment setup. They feature an intuitive on-screen display that simplifies navigation through menus and settings. The user-friendly remote control provides easy access to all functionalities, making it simple to switch between inputs or adjust audio settings.

In terms of connectivity, both the SR4002 and SR5002 are equipped with multiple HDMI inputs, including support for 1080p video, ensuring compatibility with the latest high-definition content. They also feature legacy connections, such as composite and component video inputs, making them suitable for older equipment.

Overall, the Marantz SR4002 and SR5002 are solid choices for anyone looking to elevate their home entertainment experience. With their combination of robust power, advanced processing technologies, and versatile connectivity options, these receivers deliver rich, immersive sound that brings movies, music, and games to life. Whether you choose the SR4002 for its excellent features or the SR5002 for its enhanced capabilities, both models promise to transform your audio experience.
Top Page Image Contents