Marantz SR4002/SR5002 manual Hdmi

Page 54

HDMI

SYMPTOM

CAUSE

REMEDY

 

 

 

The display does not appear

The connected monitor or projector does not support HDCP.

• Connect to equipment that supports HDCP.

over an HDMI connection.

 

• Please change the method of connection.

 

 

 

 

The HDMI input of on the TV is not on.

Set HDMI input so that it turns on, as explained in the TV’s instruction manual.

 

 

 

 

The HDMI output on the source component (DVD, Set Top Box,

Set HDMI output so that it turns on, as explained in the source component’s instruction manual.

 

etc.) is not on.

 

 

 

 

 

The HDMI mode is not correctly set on the unit.

Set HDMI input on the FUNC INPUT SETUP menu as explained on page 33.

 

 

 

 

The HDMI output video resolution of the source component (DVD,

Set the resolution so that it matches, as explained in the instruction manuals of both components.

 

Set Top Box, etc.) does not match the TV specifications.

 

 

 

 

 

The device is connected with a non-standard HDMI cable.

A 5 m or shorter cable is recommended to ensure stable operation and prevent image quality

 

 

deterioration.

 

 

 

 

Power to the unit is off. (When the unit is on standby, HDMI

Turn on the power to the unit.

 

connections cannot be turned on.)

 

 

 

 

 

The connection between HDMI components was not

Shut off and then turn the power back on to the unit, TV and source component.

 

authenticated.

 

 

 

 

The SR4002/5002 OSD menu

The unit SETUP menu does not support HDMI output.

Use the COMPONENT VIDEO, S-VIDEO or VIDEO output.

does not appear over an HDMI

 

 

connection.

 

 

 

 

 

Time is needed for the display of

The connection is being authenticated between the HDMI

There is nothing wrong with the system. Some HDMI devices require time for authentication.

an HDMI connection to appear.

devices.

 

 

 

 

Audio is not played back over an

The HDMI audio output of the source component (DVD, Set Top

Set the HDMI audio output so that it turns on, as explained in the source component’s instruction

HDMI connection.

Box, etc.) is not on.

manual.

 

 

 

 

The signal format of the source component (DVD, Set Top Box,

Set the HDMI audio output so that it can connect to the unit, as explained in the source component’s

 

etc.) is not supported by the unit.

instruction manual.

 

 

 

 

The unit is set to the HDMI audio “THROUGH” mode.

In the “THROUGH” mode, sound is not produced from the unit. Set it to “ENABLE”. (see page 30)

 

 

 

DVD-Audio is not played back

The DVD player does not support CPPM, therefore it cannot

• Use a DVD-Audio player that supports CPPM.

over an HDMI connection.

output HDMI audio.

• Turn on PCM downsampling on the DVD player.

 

 

• Use an analog connection.

 

 

 

Super Audio CD is not played

The current HDMI connection does not support Super Audio

Use an analog connection.

back over an HDMI connection.

CDs.

 

 

 

 

ENGLISH

51

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Model SR4002/SR5002 User Guide Read Before Operating Equipment AC Polarized PlugNEC National Electrical Code Introduction Table of Contents Features DescriptionAbout Dolby Pro Logic XM Satellite Radio ReadyOperation of Remote Controller Before USEAUDIO/ Video Names and FunctionsFront Panel SR4002 Front Panel SR5002ATT Attenuate button @4 Setup MIC jackMode button AUX1 Input jacksFL Display and Indicator Rear Panel SR4002 TV, DVD, VCR, DSSRear Panel SR5002 6HDMI INPUT/OUTPUT 4AUDIO IN/OUT CD, TAPE, CD-R, TV, DVD, VCR, DSS5DIGITAL Input 8FLASHERRemote Controller ¤1 BAND/LIP SYNC/INPUT button ¤6 Volume +/- buttons¤0 P.DIRECT button ¤2 T.MODE buttonAMP Mode Remote Control OperationGeneral Information of Remote Controller to the Unit Tuner ModeControlling a Marantz VCR VCR Mode Controlling Marantz ComponentsControlling a Marantz Tape Deck Tape Mode Rewind / Forward Searchs forward or backwardControlling a Marantz Universal Dock AUX1 Mode Cursor DownBasic Operation Erasing the code by buttons Learn ModeLearning Procedure Erasing the all SourcesConnecting Speaker Wire Speaker PlacementConnecting Speakers ConnectionsConnecting a Subwoofer Connecting Digital Audio ComponentsThere are 3 types of video jacks on the rear panel Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Video jackHdmi Jack Connecting Hdmi ComponentsConnecting Hdmi Components Select an input source from the OSD menu system. SeeConnecting the Remote Control Jacks Connecting Multi Channel Audio SourceConnecting AN External Power Amplifier Connecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaSee the Checking the XM Signal Strength and Radio ID Connecting the XM CONNECT-AND-PLAY AntennaHow to Subscribe XM Radio Overview SR5002 onlyConnecting for the Multi Room SR5002 only This allows you to drive the treble and bass unitsBi-amp Connection Connecting Other Equipment RS232CSetup On Screen Display Menu SystemSpeaker Setup Speaker SetupInput Setup Assignable Digital Input and Component Video InputSpeakers Distance How to Operate MeasurementError Indications During Measurement PreferenceSurround PL Iipro Logic II Music Parameter CH Input LevelMulti Room SR5002 only CS Iicircle Surround II ParameterSimple Setup Relation of the speakers number and conectted speakerRelation of the room size and floor space Basic Operation Video Convert SR5002 onlySR4002/SR5002 Center speaker Surround ModeFront speakers SL/SR Surround speakersPure Direct AutoSource Direct EX/ESVirtual Circle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONOStereo Multi CH. STRecording AN Analog Source Display ModeOther Function Selecting Analog Audio Input or Digital Audio InputAttenuation to Analog Input Signal Listening Through HeadphonesDolby Headphone Mode Speaker A/BTV Auto ON/OFF Function AUX2 InputHT-EQ Home Theater Equalizer LIP.SYNC SR5002 onlyPreset Memory Listening to the TunerClearing Stored Preset Stations Recalling a Preset StationPreset Scan Sorting Preset StationsUsing the SR5002 Checking the XM Signal Strength and Radio IDSwitching XM Information in the Front Panel Display Listening to XM Satellite RadioWhen the channel Artist name/Song title is displayed Search ModeALL Channel Search Mode When the channel category is displayedCategory Search Mode Channel Direct CallYou can remove preset stations from the memory Checking the XM Preset ChannelPreset channel can be checked on the on screen display Using the following procedureMulti Room Multi Room Playback Using the MultiMulti indicator on the front panel will be turned off Room OUT TerminalsAnother Room Playback Using Surround Speaker B Terminals Volume of S. Speaker B is interlocked with the main volumeTroubleshooting Symptom Cause RemedyHdmi XM Satellite Radio HOW to Reset the UnitMemory backup Front KEY Button Lock of the UnitTechnical Specifications 1128, 1129, 1130 1110, 1113, 1133, 1136Video Concepts 1010, 1069, 1073, 1111 1138, 1143, 11453052, 3060, 3067 3056, 3068, 30693026, 3029, 3032 3040, 3048, 3067, 30724002, 4008, 4009 Is a registered trademark

SR4002/SR5002 specifications

The Marantz SR4002 and SR5002 are two remarkable home theater receivers that deliver exceptional audio performance, making them stand out in the crowded market of AV receivers. Both models are designed for audiophiles and home theater enthusiasts who demand superior sound quality, versatility, and advanced features.

The SR4002, known for its robust build and high-quality components, provides 100 watts of power per channel, ensuring dynamic sound reproduction for a variety of media. This model supports a wide range of audio formats, including Dolby Digital, DTS, and PCM, enabling an immersive surround sound experience. It features multiple inputs and outputs, including HDMI, allowing seamless connectivity to a multitude of devices such as Blu-ray players, gaming consoles, and streaming devices. The SR4002 also includes a built-in AM/FM tuner, giving users the flexibility to enjoy their favorite radio stations.

On the other hand, the SR5002 takes it a step further with its enhanced specifications and features. With 110 watts of power per channel, it caters to larger home theaters without sacrificing sound quality. One of the standout features of the SR5002 is its advanced audio processing technology, which ensures precise sound staging and clarity in complex audio environments. The addition of Audyssey MultEQ room calibration technology helps automatically adjust the receiver's settings based on the acoustic characteristics of the room, optimizing audio performance for an unparalleled experience.

Both models boast a sleek design that fits seamlessly into any home entertainment setup. They feature an intuitive on-screen display that simplifies navigation through menus and settings. The user-friendly remote control provides easy access to all functionalities, making it simple to switch between inputs or adjust audio settings.

In terms of connectivity, both the SR4002 and SR5002 are equipped with multiple HDMI inputs, including support for 1080p video, ensuring compatibility with the latest high-definition content. They also feature legacy connections, such as composite and component video inputs, making them suitable for older equipment.

Overall, the Marantz SR4002 and SR5002 are solid choices for anyone looking to elevate their home entertainment experience. With their combination of robust power, advanced processing technologies, and versatile connectivity options, these receivers deliver rich, immersive sound that brings movies, music, and games to life. Whether you choose the SR4002 for its excellent features or the SR5002 for its enhanced capabilities, both models promise to transform your audio experience.
Top Page Image Contents