Homelite F2020, UT70121 manual Silencer Guard Assembly

Page 8

ASSEMBLY

SILENCER GUARD ASSEMBLY

See Figure 4.

1.Remove silencer guard and two screws from the owner’s kit.

2.Attach the silencer guard to the rear housing.

NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.

3.Install two screws.

4.Tighten screws securely.

8

REAR

HOUSING

TORQUE

WRENCH

SILENCER

GUARD

SCREWS

BENT END OF

SILENCER GUARD

OPENING IN REAR

HOUSING

Fig. 4

Image 8

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents SafetySpecific Safety Rules for Trimmer USE Symbols Symbol Name ExplanationTechnical Data Features UnpackingInstructions Packing List for OWNER’S KITAssembly Assembly InstructionsSee Figure BoltSilencer Guard Assembly Fuel and Refuelling Operating the TrimmerHandling the Fuel Safely Mixing the FuelOperation Advancing the StringCutting Tips Grass Deflector Line Trimming CUT- OFF BladeIgnition Switch Starting and StoppingTo Start a Cold Engine To Start a Warm EngineMaintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 10Cleaning the Exhaust Port and Silencer String ReplacementSpark Arrester Arrows on Spool Anchor Hole First StringReplacing and Cleaning AIR Filter Fuel CAPSparking Plug Storage 1 Month or LongerTroubleshooting Speed. See FigureIdle Speed Screw Mixture Needle Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of ConformityRyobi Technologies GmbH