Homelite UT70127 manual Table of Contents, Safety

Page 2

TABLE OF CONTENTS

Safety

2

- 3

Symbols

4

- 5

Technical Data

 

5

Unpacking

 

6

Features

 

6

Assembly

7

- 11

Operation

12

- 15

Maintenance

16

- 19

Troubleshooting

20

- 21

Warranty

 

22

Safety Directive

 

22

SAFETY

WARNING:

Do not attempt to operate this trimmer until you have read thoroughly and understand completely all instructions, safety rules etc contained in this manual. Failure to comply may result in accidents involving fire, electric shock or serious personal injury. Save operator’s manual and review frequently for continuing safe operation, and instructing others who may use this tool.

READ ALL INSTRUCTIONS

GENERAL SAFETY RULES

For safe operation, read and understand all instructions before using the trimmer/brushcutter. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury.

Do not allow children or untrained individuals to use this unit.

Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill.

Clear the work area before each use. Remove all objects such as stones, broken glass, nails, wire or string which can be thrown or become entangled in the string head or blade.

Wear full eye and hearing protection while operating this unit.

Wear heavy long trousers, boots and gloves. Do not wear loose fitting clothing, shorts, jewellery of any kind, or go barefoot.

Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.

Keep all bystanders, children and pets at least 15 m (50 ft) away.

Do not operate this unit when you are tired, ill or under the influence of alcohol, drugs or medication.

Do not operate in poor lighting.

Keep firm footing and balance. Do not overreach. Overreaching may result in loss of balance or exposure to hot surfaces.

Keep all parts of your body away from any moving part.

Do not touch area round the silencer or cylinder of the trimmer/brushcutter; these parts get hot from operation.

Always stop the engine and remove the sparking plug wire before making any adjustments or repairs except for carburettor adjustments.

2

Image 2
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data Vibration level racingInstructions FeaturesUnpacking Packing List for OWNER’S KITRemoving the Attachment from the Power Head AssemblyAttaching the Power Head to the Trimmer Attachment Attaching the Storage HangerFront Handle Clamp Quick Release TAB Bolt Front HandleAttaching the Shoulder Strap Grass Deflector and Blade Guard USE Silencer Guard AssemblyRear Housing TorqueGrass Deflector Drive Connector Spool RetainerBlade Guard Converting from Trimmer to BrushcutterConverting from Brushcutter to Trimmer Installing the BladeInstalling the String Head Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT- OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade To Start a Cold Engine Ignition SwitchStarting and Stopping To Start a Warm EngineNEW PRE-WOUND Spool MaintenanceSpool Replacement EZ Line TAP Advance System See Figures 18Slot String ReplacementBlade Protector Spring Spool Arrows on Anchor Hole First StringSpark Arrester Cleaning the Exhaust Port and SilencerReplacing and Cleaning AIR Filter See Figures 25Sparking Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Idle Speed Screw Needle Guarantee Statement Rtsa / Rtuk / RTG WarrantySafety Directive Sound Pressure Sound Power Vibration Model Model noPage Ryobi Technologies GmbH