Homelite UT10012, UT10032, UT10512 manual California Proposition, Serial Number

Page 38

OPERATOR’S MANUAL

14 in. 33cc CHAIN SAW

UT10012 / UT10512

16 in. 33cc CHAIN SAW

UT10032 / UT10532

WARNING:

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

CALIFORNIA PROPOSITION 65

SERVICE

For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant information when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-242-4672 or visit us online at www.homelite.com.

REPAIR PARTS

The model number of this product is found on a plate or label attached to the housing. Please record the serial number in the space provided below.

MODEL NUMBER UT10012/UT10512 and UT10032/UT10532

SERIAL NUMBER

HOMELITE CONSUMER PRODUCTS, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Post Office Box 1207, Anderson, SC 29622

Phone 1-800-242-4672

www.homelite.com

983000-735

7-05

Image 38

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsKickback Specific Safety RulesRefueling do not Smoke Symbols Symbol Name DESIGNATION/EXPLANATIONService Glossary of Terms Features Product SpecificationsAssembly Handling the Fuel Safely OperationApplications Mixing the FuelOperating the Chain Brake Filling the Fuel TankAdding BAR and Chain OIL See Figures 4See Figures 6 Starter Grip Ignition Switch RUN PositionStarting the Engine To Start a Cold EngineTo Start a Warm Engine Ignition Switch Stop Position Brake PositionStopping the Engine See Figures 12Idle Speed Screw T Pull Push Adjusting Idle SpeedPull and Push See Figures 16 Kickback PrecautionsProper Grip on Handles Kickback Rotational Proper Hand Grip Position Proper GripProper Cutting Stance Work Area PrecautionsBasic OPERATING/CUTTING Procedures Chain LineSee Figures 21 Proper Procedure for Tree FellingHazardous Conditions Planned Line FallHinge Back CUT Wedge Vertical Loose Section Removing Buttress RootsBucking KickbackOverbucking Bucking with a WedgeBucking Logs Under Stress Cutting Springpoles UnderbuckingLimbing and Pruning See Figures 31Lubrication MaintenanceGeneral Maintenance Replacing the Guide BAR and ChainBAR Studs Adjusting Flats on Drive Links Adjusting the Chain TensionSee Figures 44 ≈ .050 in .25 mm ≈ .050 1.25 mm Chain MaintenanceSee Figures 47 Raker Depth Gauge ClearanceCutting Corner TOP Plate Side Plate Rivet Hole Sharpening the CuttersSee Figures 49 Heel TOE Gullet Left Hand Cutters Right HandMaintaining Depth Gauge Clearance TOP Plate Filing AngleSide Plate Angle SeeMaintaining the SAFE-T-TIP Nose Guard Maintaining the Guide BARMounting the SAFE-T-TIP Nose Guard See Figures 59Cleaning the AIR Filter See Figures 61Before adjusting the carburetor Adjusting the CarburetorCleaning the Starter Unit See Figures 64Replacing the Spark Plug Cleaning the EngineChecking the Fuel Filter See Figures 67Storing the Chain SAW 1 Month or Longer INSPECTING/CLEANING the Spark Arrestor ScreenInspecting and Cleaning the Chain Brake See Figures 72Length of Bar Guide Bar Part Number Chain Part Number TroubleshootingBAR and Chain Combinations Call US First Warranty Limited Warranty StatementMaintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageCarburetor Assy Emissions Maintenance Schedule and Warranted Parts ListAIR Filter Assy Fuel Tank AssyPage Model Number UT10012/UT10512 and UT10032/UT10532 California PropositionSerial Number