Homelite UT10012, UT10032, UT10512 manual Introduction, Table of Contents

Page 2

 

TABLE OF CONTENTS

n Introduction

2

n General Safety Rules

3-4

n Specific Safety Rules

4

n Symbols

5-6

n Glossary of Terms

7

��n Features

8-9

��n Assembly

9

n Operation

10-20

n Maintenance

21-31

n Bar and Chain Combinations

32

n Troubleshooting

32-33

n Warranty

34-36

n Parts Ordering / Service

38

 

INTRODUCTION

This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

2

Image 2
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsKickback Specific Safety RulesRefueling do not Smoke Symbols Symbol Name DESIGNATION/EXPLANATIONService Glossary of Terms Features Product SpecificationsAssembly Handling the Fuel Safely OperationApplications Mixing the FuelOperating the Chain Brake Filling the Fuel TankAdding BAR and Chain OIL See Figures 4See Figures 6 Starter Grip Ignition Switch RUN PositionStarting the Engine To Start a Cold EngineTo Start a Warm Engine Ignition Switch Stop Position Brake PositionStopping the Engine See Figures 12Idle Speed Screw T Pull Push Adjusting Idle SpeedPull and Push See Figures 16 Kickback PrecautionsProper Grip on Handles Kickback Rotational Proper Hand Grip Position Proper GripProper Cutting Stance Work Area PrecautionsBasic OPERATING/CUTTING Procedures Chain LineSee Figures 21 Proper Procedure for Tree FellingHazardous Conditions Planned Line FallHinge Back CUT Wedge Vertical Loose Section Removing Buttress RootsBucking KickbackOverbucking Bucking with a WedgeBucking Logs Under Stress Cutting Springpoles UnderbuckingLimbing and Pruning See Figures 31Lubrication MaintenanceGeneral Maintenance Replacing the Guide BAR and ChainBAR Studs Adjusting Flats on Drive Links Adjusting the Chain TensionSee Figures 44 ≈ .050 in .25 mm ≈ .050 1.25 mm Chain MaintenanceSee Figures 47 Raker Depth Gauge ClearanceCutting Corner TOP Plate Side Plate Rivet Hole Sharpening the CuttersSee Figures 49 Heel TOE Gullet Left Hand Cutters Right HandMaintaining Depth Gauge Clearance TOP Plate Filing AngleSide Plate Angle SeeMaintaining the SAFE-T-TIP Nose Guard Maintaining the Guide BARMounting the SAFE-T-TIP Nose Guard See Figures 59Cleaning the AIR Filter See Figures 61Before adjusting the carburetor Adjusting the CarburetorCleaning the Starter Unit See Figures 64Replacing the Spark Plug Cleaning the EngineChecking the Fuel Filter See Figures 67Storing the Chain SAW 1 Month or Longer INSPECTING/CLEANING the Spark Arrestor ScreenInspecting and Cleaning the Chain Brake See Figures 72Length of Bar Guide Bar Part Number Chain Part Number TroubleshootingBAR and Chain Combinations Call US First Warranty Limited Warranty StatementMaintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageCarburetor Assy Emissions Maintenance Schedule and Warranted Parts ListAIR Filter Assy Fuel Tank AssyPage Model Number UT10012/UT10512 and UT10032/UT10532 California PropositionSerial Number