1. DEALER INSTALLATIONINSTRUCTIONS
12.Install the mulching blade, using the original blade holder and hardware.
Be sure the blade is positioned right side up (outer edges turn toward the mower deck). If the blade is installed upside down, it cannot cut properly.
The blade bolts are specially designedfor this application and must not be replacedwith any other bolts.
Use a wooden block to preventthe blade from turning when tightening the bolts.
Tighten the 10x 28 mm flange bolt to a torque value of 36.2
Tighten the 12 x 25 mm flange bolts to a torque value of 61.5
BLADEWASHER \ | 9- | 1Ox28mm |
| FLANGE BOLT |
FLANGE BOLT
MULCHING
BLADE
BLADE HOLDER B
I
5