Harbor Freight Tools 94515 manual Inset, and diagram to the right

Page 10

 

Right

Left

 

To

Doorway

Doorway

To

Stud (7)

Stud (6)

Corner

Corner

 

 

Stud (29)

 

 

Stud (1)

 

 

Front Floor Plate (17)

 

View from above

5.Install the Left and Right Doorway Studs (6, 7) to the outside of the frame so that they rest flat against the frame. Their orientation should be the same as shown above. Slide a Bolt (43) into each slot for later Front Brace (23) assembly. Slide a Hold-Down Connector (55) under the base and over the Bolt at each bottom con- nection, do not secure with a Nut (52) until the next step.

6.Remove the bottom Bolt from the Corner Brackets (13) at the front of the greenhouse. Install the Front Diagonal Braces (25) with their flanges facing inward to the bottom hole of the Brackets on the inside using Bolts (43). Attach the bottom of the Front Diagonal Braces (25) to the Bolt left exposed on the Floor Plate (17) from the last step. (See Figure C.)

7.Remove next bolt up from the front Corner Brackets (13). Connect the Front Braces (23) to the exposed hole. Connect the loose ends of the Front Braces (23) to the Doorway Studs (6, 7), using the Bolts (43) included in the Doorway Studs (6, 7) in step 5, above. (See Figure C.)

8.Attach the Door Slide Support (19) to the Front-Left Crown Beam (3) using the Long Door Support Bolt (38) and Nut (52), with the Door Support

 

Spacer (39) between the Support and the Stud. (See Figure C,

19

 

inset, and diagram to the right.)

38

9.

The frame should now rest square. Measure diagonally from cor-

3

 

 

ner to corner at the top. If the measurements are not equal, adjust

39

 

the frame as needed until square. Some Nuts (52) may need to

23

 

be temporarily loosened to adjust the frame properly.

 

10.Place the Gutter End Caps (48) onto the ends of the Side Ceiling Plates (36) oriented with a gap in the bottom to allow water to drain out of the gutters.

SKU 94515

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ’ x 6’ Greenhouse Contents Specifications Save This ManualSKU For technical questions, please call Important-Read the following carefully Before Proceeding Frame Assembly Figure a Assembling the Roof Frame Figure BAssembling the Studs and Braces Figure CInset, and diagram to the right Assembling the Roof Studs and Braces Figure DAssembling the Windows Pane Installing the Transparent Panels # = Panel Clip 67 Location Please Read the Following Carefully Parts List Part Description ’tyParts List

94515 specifications

Harbor Freight Tools is known for offering a wide variety of affordable and reliable tools, and one of their standout products is the 94515. This bench-top air compressor is designed to meet the needs of DIY enthusiasts and professionals alike, providing efficient and effective performance for various applications.

The Harbor Freight Tools 94515 features a powerful 2.5 HP motor that delivers a maximum pressure of 125 PSI. This impressive power enables users to tackle a wide range of tasks, including inflating tires, powering pneumatic tools, and even operating spray guns for painting projects. The compressor comes equipped with a 10-gallon horizontal tank, which not only increases air storage capacity but also aids in reducing the frequency of motor cycling, thus prolonging its lifespan.

One of the key technologies integrated into the 94515 is its oil-lubricated pump. This feature ensures smooth operation and enhanced durability, reducing wear and tear over time. By using oil, the pump operates more efficiently, providing quieter performance compared to many oil-free alternatives. Additionally, the compressor has a built-in thermal overload protector, which automatically shuts off the motor in case of overheating, further extending its service life and preventing damage.

The 94515 is designed for user convenience and safety. Its lightweight and compact design make it easy to transport from one job site to another. The compressor features rubber feet that provide stability and reduce vibrations during operation. Users will appreciate the easy-to-read gauges that show tank pressure and regulated pressure, allowing for precise control during use.

Another significant characteristic of the Harbor Freight Tools 94515 is its versatility. With multiple output options, including quick connect fittings, it can be used with a variety of tools and accessories. Whether you need to power a nail gun, an impact wrench, or airbrush equipment, this compressor can get the job done efficiently.

In summary, the Harbor Freight Tools 94515 is a robust, user-friendly air compressor that offers impressive performance, durability, and versatility. Its combination of a powerful motor, oil-lubricated pump, and user-oriented features make it an ideal choice for both hobbyists and professional tradespeople looking for an effective air compression solution. With its competitive price point, the 94515 stands out as a worthwhile investment that can enhance productivity and efficiency in any workshop or job site.
Top Page Image Contents