Figure a

3.Place two Bolts (43) and Nuts (52) into the holes on the Top Doorway Beam (12). Do not tighten them yet. While making sure that the profiles of the parts are ori- ented as shown to the right, slide the slot on the Door Rail (14) 12

	over the heads of the bolts on the Top Doorway Beam. Align the
	right edge of the Door Rail on the Doorway Beam, then tighten	14
	the Nuts.	14
	the Nuts.

4.Attach a Corner End Cap (47) to the top outer corner of each Corner Stud (1, 29).

The 8 spots requiring a Hold- down Connector (55) are marked with a plus (+).

(Rear)

34 (Left)

36	13
(Right)	29
	29
34
	+
	+

(Front)

5.Attach a Side Ceiling Plate (36) flat against the inside of two Corner Studs (1,29). Make sure that the gutter on the Side Ceiling Plate is oriented correctly, see Figure A inset. At this point, the completed section of the frame will likely need support. Attach the second Ceiling Plate the same way.

6.Attach a Corner Bracket (13) at the inside top of each Corner Stud (1,29) so that the bracket faces upwards, see diagram to the right. Leave the upper holes of the two rear Corner Brackets (13) empty to allow the rear brace to be attached to those holes in the next step.

7.Attach the Rear Brace (21) to the inside of the two Corner Brackets (13) that are over the Rear Floor Plate (16). The flange on the Rear Brace should face inward. Attach each

end to the upper hole on the Corner Bracket (13). (See Figure A.)

SKU 94515

For technical questions, please call 1-800-444-3353.

Page

94515 specifications

Harbor Freight Tools is known for offering a wide variety of affordable and reliable tools, and one of their standout products is the 94515. This bench-top air compressor is designed to meet the needs of DIY enthusiasts and professionals alike, providing efficient and effective performance for various applications.

The Harbor Freight Tools 94515 features a powerful 2.5 HP motor that delivers a maximum pressure of 125 PSI. This impressive power enables users to tackle a wide range of tasks, including inflating tires, powering pneumatic tools, and even operating spray guns for painting projects. The compressor comes equipped with a 10-gallon horizontal tank, which not only increases air storage capacity but also aids in reducing the frequency of motor cycling, thus prolonging its lifespan.

One of the key technologies integrated into the 94515 is its oil-lubricated pump. This feature ensures smooth operation and enhanced durability, reducing wear and tear over time. By using oil, the pump operates more efficiently, providing quieter performance compared to many oil-free alternatives. Additionally, the compressor has a built-in thermal overload protector, which automatically shuts off the motor in case of overheating, further extending its service life and preventing damage.

The 94515 is designed for user convenience and safety. Its lightweight and compact design make it easy to transport from one job site to another. The compressor features rubber feet that provide stability and reduce vibrations during operation. Users will appreciate the easy-to-read gauges that show tank pressure and regulated pressure, allowing for precise control during use.

Another significant characteristic of the Harbor Freight Tools 94515 is its versatility. With multiple output options, including quick connect fittings, it can be used with a variety of tools and accessories. Whether you need to power a nail gun, an impact wrench, or airbrush equipment, this compressor can get the job done efficiently.

In summary, the Harbor Freight Tools 94515 is a robust, user-friendly air compressor that offers impressive performance, durability, and versatility. Its combination of a powerful motor, oil-lubricated pump, and user-oriented features make it an ideal choice for both hobbyists and professional tradespeople looking for an effective air compression solution. With its competitive price point, the 94515 stands out as a worthwhile investment that can enhance productivity and efficiency in any workshop or job site.