Installing the Transparent Panels

1.Panel Clips (46) are used to secure the Transparent Panels in place on the Green- house.

2.Remove the protective film from both sides of all panels.

63/65

6363

3265

15a/15b

3.The Roof Panels (63) and the Roof Window Panels (65) will need to be placed as shown in the illustrations above. The top edges of these panels need to be placed up under the edge of the Crown (35) or the Window Support Beam (15a/15b).

4.One at a time, place each Transparent Panel (62–70) in its proper location on the Ceiling, Frame, and Door of the Greenhouse. Then, secure the Transparent Panel in place, using the quantity and location of Panel Clips (46) as shown in the Panel Installation Diagram, next page. Also, refer to the panel clip installation instructions in step 6.

5.If the Door Top/Bottom Panel (70) does not fit properly, turn it 90° and try refitting it.

6.Be careful, Panel Clip (46) ends may be sharp and may spring back! To attach Panel Clips:

a.Place the two loose ends of the Clip into the groove in the frame.

b.Swing the center portion of the Clip up against the panel.

c.Two edges of the Clip swing under the edge of the panel and the center edge holds the panel in place.

SKU 94515

For technical questions, please call 1-800-444-3353.

Page 14

94515 specifications

Harbor Freight Tools is known for offering a wide variety of affordable and reliable tools, and one of their standout products is the 94515. This bench-top air compressor is designed to meet the needs of DIY enthusiasts and professionals alike, providing efficient and effective performance for various applications.

The Harbor Freight Tools 94515 features a powerful 2.5 HP motor that delivers a maximum pressure of 125 PSI. This impressive power enables users to tackle a wide range of tasks, including inflating tires, powering pneumatic tools, and even operating spray guns for painting projects. The compressor comes equipped with a 10-gallon horizontal tank, which not only increases air storage capacity but also aids in reducing the frequency of motor cycling, thus prolonging its lifespan.

One of the key technologies integrated into the 94515 is its oil-lubricated pump. This feature ensures smooth operation and enhanced durability, reducing wear and tear over time. By using oil, the pump operates more efficiently, providing quieter performance compared to many oil-free alternatives. Additionally, the compressor has a built-in thermal overload protector, which automatically shuts off the motor in case of overheating, further extending its service life and preventing damage.

The 94515 is designed for user convenience and safety. Its lightweight and compact design make it easy to transport from one job site to another. The compressor features rubber feet that provide stability and reduce vibrations during operation. Users will appreciate the easy-to-read gauges that show tank pressure and regulated pressure, allowing for precise control during use.

Another significant characteristic of the Harbor Freight Tools 94515 is its versatility. With multiple output options, including quick connect fittings, it can be used with a variety of tools and accessories. Whether you need to power a nail gun, an impact wrench, or airbrush equipment, this compressor can get the job done efficiently.

In summary, the Harbor Freight Tools 94515 is a robust, user-friendly air compressor that offers impressive performance, durability, and versatility. Its combination of a powerful motor, oil-lubricated pump, and user-oriented features make it an ideal choice for both hobbyists and professional tradespeople looking for an effective air compression solution. With its competitive price point, the 94515 stands out as a worthwhile investment that can enhance productivity and efficiency in any workshop or job site.