Frame Assembly

•Unless noted otherwise, all frame parts will be attached using the Bolts

(43) and Nuts (52) provided. Bolts should all be assembled with their heads facing the outside of the greenhouse. Tighten Nuts only about 1/4 turn past finger-tight; be careful not to overtighten.

•Lay out all parts by number prior to assembly.

•An assistant or an appropriate support (not included) will be useful to keep the partially assembled parts upright during assembly. An assistant should be used to assemble the Crown pieces to the rest of the frame.

•Assemble on a clear, calm day. Wind may damage the Greenhouse and will make assembly difficult.

Cross Section

Assembling the Outer Frame

1.Lay all Floor Plates (16, 17, 34) out on top of the base with the flanges facing the outside of the greenhouse as shown above. Make sure that the Front Floor Plate

(17)is on the side that you want your door to be located.

2.There are four Corner Studs (1, 29) to be attached to the Floor Plates (16, 17, 34), the end with two holes should be at the bottom. As explained below, attach Left- hand Corner Studs (1) on the outside of the front-left and rear-right corner using two Bolts each Stud. Attach the Right-hand Corner Studs (29) on the outside of the two remaining corners, also as explained below.

To attach the corner studs, as shown to the right: 1) slide a Hold Down Connector (55) up under the rail and over the end of the Bolt (43), then 2) secure it using a Nut (52). Use two Hold Down Connectors for each Cor- ner Stud.

SKU 94515

For technical questions, please call 1-800-444-3353.

Page

94515 specifications

Harbor Freight Tools is known for offering a wide variety of affordable and reliable tools, and one of their standout products is the 94515. This bench-top air compressor is designed to meet the needs of DIY enthusiasts and professionals alike, providing efficient and effective performance for various applications.

The Harbor Freight Tools 94515 features a powerful 2.5 HP motor that delivers a maximum pressure of 125 PSI. This impressive power enables users to tackle a wide range of tasks, including inflating tires, powering pneumatic tools, and even operating spray guns for painting projects. The compressor comes equipped with a 10-gallon horizontal tank, which not only increases air storage capacity but also aids in reducing the frequency of motor cycling, thus prolonging its lifespan.

One of the key technologies integrated into the 94515 is its oil-lubricated pump. This feature ensures smooth operation and enhanced durability, reducing wear and tear over time. By using oil, the pump operates more efficiently, providing quieter performance compared to many oil-free alternatives. Additionally, the compressor has a built-in thermal overload protector, which automatically shuts off the motor in case of overheating, further extending its service life and preventing damage.

The 94515 is designed for user convenience and safety. Its lightweight and compact design make it easy to transport from one job site to another. The compressor features rubber feet that provide stability and reduce vibrations during operation. Users will appreciate the easy-to-read gauges that show tank pressure and regulated pressure, allowing for precise control during use.

Another significant characteristic of the Harbor Freight Tools 94515 is its versatility. With multiple output options, including quick connect fittings, it can be used with a variety of tools and accessories. Whether you need to power a nail gun, an impact wrench, or airbrush equipment, this compressor can get the job done efficiently.

In summary, the Harbor Freight Tools 94515 is a robust, user-friendly air compressor that offers impressive performance, durability, and versatility. Its combination of a powerful motor, oil-lubricated pump, and user-oriented features make it an ideal choice for both hobbyists and professional tradespeople looking for an effective air compression solution. With its competitive price point, the 94515 stands out as a worthwhile investment that can enhance productivity and efficiency in any workshop or job site.