Figure H

Clevis Pin (74)

3.Raise the Log Lift and insert the Clevis Pin (74) in the upper hole and secure with R-pin (41) - See Figure H.

Figure I

Push Pin (42)

4.Move the front leg up and secure it at the second Pin hole. Insert the Push Pin (42) to lock in place - See Figure I.

5.Do not drive faster than 55 MPH when the Log Splitter is connected to the vehicle.

6.Do not tow the Log Splitter on roads or highways. This product is not D.O.T. compliant, and is not road legal.

7.Before transporting, and at 500 mile intervals during every trip, check and tighten the Tire Lug Nuts to 85 - 90 Ft.-Lbs.

8.Every 2,000 to 3,000 miles of travel, lubricate the Hub Assemblies with a heavy weight bearing grease. Follow the Packing the Bearings Instructions on page 7 of this manual. After each Hub Assembly is reassembled, tighten the Castle Nuts to 20-25 ft. pounds, and rotate each tire several turns to seat the bearing. Back off the Castle Nut one half turn.

9.Insert a new Cotter Pin (53) through the Castle Nut and the hole in the axle. Bend the Pin back, locking it and the Nut in place.

SKU 56072

For technical questions, please call 1-800-444-3353.

Page 13