Harbor Freight Tools 65761 manual Save This Manual, Set up precautions

Page 4

Save This Manual

Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous

situation which, if not avoided, will result in death or serious injury.

WARNING indicates a

hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety

alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert

symbol, is used to address practices not related to personal injury.

WARNING! Read all instructions. Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Set up precautions

1.Gasoline fuel and fumes are flamma- ble, and potentially explosive. Use proper fuel storage and handling pro- cedures. Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extin- guishers nearby.

3.Operation of this equipment may cre- ate sparks that can start fires around dry vegetation.

A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations relat- ing to fire prevention requirements.

4.Set up and use only on a flat, level, well-ventilated surface.

SKU 65761

For technical questions, please call 1-800-444-3353.

Page 4

Image 4
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents For technical questions, please call Set up precautions Save This ManualOperating precautions Carbon Monoxide Hazard Using an engine indoorsFor technical questions, please call Service precautions Basic Specifications Set Up InstructionsAssembly Access the Tires 48 for the followingConnecting the Rail Assembly to the Oil Tank Place Log Here Operating Instructions Starting the EngineEquipment Operation Important Information Transporting the Log SplitterFor technical questions, please call Maintenance Procedures Technical SpecificationsServicing Cleaning Air Filter Element MaintenanceFuel Filter Replacement if equipped Cleaning, Maintenance, Lubrication Schedule StorageTransport Maintenance Problem Possible Causes Probable Solutions Engine will not TroubleshootingStart Problem Possible Causes Probable Solutions Engine misfires Engine stopsSuddenly Engine knocksPart Description Qty Record Product’s Serial Number HereAssembly Diagram Cylinder head parts list & diagram Description QtyCrank case parts list & diagram Crank case cover parts list and diagram CRANKSHAFT/PISTON Parts List & Diagram Gas distribution adjustment system parts list Diagram Starter subassembly parts list & diagram Diversion Assembly parts list & diagram Carburetor parts list & diagram Flywheel/coil assembly parts list & diagram Control system parts list & diagram Air cleaner parts list & diagram Muffler parts list & diagram Muffler parts list & diagram Limited 1 year / 90 Day Warranty Emission Control System WarrantyOwner’s Warranty Responsibilities