Harbor Freight Tools 69672 manual Starting the Engine, Operation

Page 10

Starting the Engine

1.To start a cold engine, move the Choke to the CHOKE position.

To restart a warm engine, leave the Choke in the RUN position.

SAFETY

2. Open the Fuel Valve.

SETUP

3. Turn the Engine Switch to ON.

OPERATION

until resistance is felt. Allow Cable to retract fully and

 

4. Grip the Starter Handle of the Engine loosely and pull it

 

slowly several times to allow the gasoline to flow into the

 

Engine’s carburetor. Then pull the Starter Handle gently

 

then pull it quickly. Repeat until the engine starts.

 

Note: Do not let the Starter Handle snap back against

 

the engine. Hold it as it recoils so it doesn’t

 

hit the engine.

 

 

 

 

MAINTENANCE

5. Allow the Engine to run for several seconds.

 

 

Then, if the Choke lever is in the CHOKE position,

 

move the Choke Lever very slowly to its RUN position.

 

NOTE: Moving the Choke Lever too fast could stall the engine.

 

IMPORTANT: Allow the engine to run at no load for five minutes with no

 

load after each start‑up so that the engine can stabilize.

 

Page 10

For Generator technical questions, please call 1-800-444-3353.

 

For Engine technical questions, please call 1-800-520-0882.

I ON

O

Item 69672 / 69674

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Table of Contents Set up PrecautionsCarbon Monoxide Hazard Using a generator indoors can Kill Operating PrecautionsSetup Operation Maintenance YOU in MinutesSafety Setup Operation Maintenance Service Precautions RefuelingSafety Setup SpecificationsComponents and Controls OFF Generator Pre-Start Checks Operation MaintenanceGrounding To Prevent Serious InjuryChecking and Filling Fuel Using the GeneratorInjury from Fire Starting the Engine OperationConnecting Electrical Loads If ANY Circuit Breakers Trip Check the FollowingEquipment Wattage Estimate ChartsTo use the table ExampleStopping the Engine in an Emergency Stopping the Engine Under Normal ConditionsTo Prevent Serious Injury from Equipment Failure Cleaning, Maintenance, and LubricationTo Prevent Serious Injury from Accidental Operation Hr. of useChecking and Filling Fuel Air Filter Element MaintenanceEngine Oil Change Spark Plug Maintenance StorageDo not use gasoline with more than TroubleshootingProblem Possible Causes Probable Solutions 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionPart Description Parts ListQty Part Description Safety Setup Operation Part Description QtyAssembly Diagram Assembly Diagram For Both Items Manufacturer’s Warranty Coverage Owner’s Warranty ResponsibilitiesMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69672 specifications

Harbor Freight Tools is renowned for providing quality tools at affordable prices, and one of its standout products is the Harbor Freight Tools 69672. This product epitomizes the brand’s commitment to value and functionality, making it a favored choice among DIY enthusiasts and professionals alike.

The Harbor Freight 69672 is a versatile 4-inch bench vise designed to meet the demands of a wide range of applications, from woodworking to metalworking. One of its main features is its sturdy cast iron construction, which ensures durability and stability during use. This material not only offers a robust design but also helps to absorb vibrations, providing a secure grip for various workpieces.

Equipped with a 360-degree swivel base, the 69672 allows users to rotate the workpiece for more convenient access from different angles. This flexibility is particularly useful when working on intricate projects that require precision and detail. The built-in anvil surface is another notable feature, offering a practical area for hammering tasks, which further enhances the tool's functionality.

The jaws of the Harbor Freight 69672 are designed with serrated teeth, providing a firm grip on materials without damaging them. The jaws open to a maximum width of 4 inches, accommodating a variety of workpiece sizes. Additionally, the built-in jaw pads can be replaced, making maintenance easy and ensuring that the vise remains in top working condition over time.

Ease of use is also a key characteristic of the 69672. The large, easy-to-turn handle contributes to its user-friendly design, allowing for quick adjustments without much effort. This feature is particularly beneficial for prolonged use, where comfort is paramount.

In addition to its physical features, the Harbor Freight Tools 69672 is priced competitively, making it an attractive option for both hobbyists and professionals seeking reliable quality without breaking the bank. This product exemplifies the brand’s mission to deliver high-quality tools at accessible prices, reinforcing its reputation in the tool industry.

In summary, the Harbor Freight Tools 69672 bench vise combines robust construction, versatile features, and user-friendly design, making it a valuable asset in any workshop. Whether tackling small household repairs or larger projects, this tool stands out for its quality and functionality.
Top Page Image Contents