Harbor Freight Tools 69672 Operating Precautions, Setup Operation Maintenance, YOU in Minutes

Page 3

Set up Precautions (cont.)

9.Improper connections to a building electrical system can allow electrical current from the generator to backfeed into the utility lines.

Such backfeed may electrocute utility company workers or others who contact the lines during a power outage, and the generator may explode, burn, or cause fires when utility power is restored. Consult the utility company and a qualified electrician if intending to use the generator for back up power.

10.Do not operate the Generator before grounding. The Generator must be earth-grounded

in accordance with all relevant electrical codes and standards before operation.

SAFETY

Operating Precautions

1.CARBON MONOXIDE HAZARD Using a generator indoors CAN KILL

YOU IN MINUTES.

Generator exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows, doors, and vents.

2.Never use a generator indoors, including in garages, basements, crawlspaces and sheds. Opening doors and windows or using fans will NOT prevent carbon monoxide build up in the home.

3.When using generators, keep them outdoors and far away from open doors, windows, and vents to avoid toxic levels of carbon monoxide from building up indoors.

4.If you start to feel sick, dizzy, or weak while using a generator, get to fresh air right away. The carbon monoxide from generators can quickly lead to full incapacitation and death.

5.Keep children away from the equipment, especially while it is operating.

6.Keep all spectators at least six feet from the Engine during operation.

7.Fire Hazard! Do not fill gas tank while engine is running. Do not operate if gasoline has been spilled. Clean spilled gasoline before starting engine.

Do not operate near pilot light or open flame.

8.Do not touch engine during use. Let engine cool down after use.

9.Never store fuel or other flammable materials near the engine.

10.If the plugged in product operates abnormally or unusually slow, immediately stop using the generator as a power source. Always read and adhere to the instruction manual of the product to be powered, to make sure that it can be safely and efficiently powered by a portable generator.

11.Before connecting an appliance or power cord to the generator: Make sure that it is in good working order. Faulty appliances or power cords can create a potential for electrical shock.

12.Do not exceed the maximum power rating of the generator. Make sure that the total electrical rating of the all of the tools or appliances plugged into the generator at the same time does not exceed that of the generator. Check that the startup surge will not be beyond the limit of the Generator. Power levels between rated and maximum

may be used for no more than 30 minutes.

13.Avoid substantially overloading which will trip the circuit breaker. Exceeding the time limit for maximum power operation or slightly overloading the generator may not switch the circuit breaker or circuit protector OFF, but will shorten the service life of the generator.

14.Do not attempt to connect or disconnect load connections while standing in water, or on wet or soggy ground.

15.Do not touch electrically energized parts of the Generator and interconnecting cables or conductors with any part of the body, or with any non-insulated conductive object.

SETUP

OPERATION

MAINTENANCE

Item 69672 / 69674

For Generator technical questions, please call 1-800-444-3353.

Page 3

For Engine technical questions, please call 1-800-520-0882.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Set up Precautions Table of ContentsYOU in Minutes Operating PrecautionsSetup Operation Maintenance Carbon Monoxide Hazard Using a generator indoors can KillSafety Setup Operation Maintenance Refueling Service PrecautionsSpecifications Safety SetupComponents and Controls OFF To Prevent Serious Injury Operation MaintenanceGrounding Generator Pre-Start ChecksUsing the Generator Checking and Filling FuelInjury from Fire Operation Starting the EngineIf ANY Circuit Breakers Trip Check the Following Connecting Electrical LoadsExample Wattage Estimate ChartsTo use the table EquipmentStopping the Engine Under Normal Conditions Stopping the Engine in an EmergencyHr. of use Cleaning, Maintenance, and LubricationTo Prevent Serious Injury from Accidental Operation To Prevent Serious Injury from Equipment FailureAir Filter Element Maintenance Checking and Filling FuelEngine Oil Change Storage Spark Plug Maintenance10% ethanol E15, E20, E85, etc TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startParts List Part DescriptionQty Part Description Part Description Qty Safety Setup OperationAssembly Diagram Assembly Diagram Owner’s Warranty Responsibilities For Both Items Manufacturer’s Warranty CoverageMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69672 specifications

Harbor Freight Tools is renowned for providing quality tools at affordable prices, and one of its standout products is the Harbor Freight Tools 69672. This product epitomizes the brand’s commitment to value and functionality, making it a favored choice among DIY enthusiasts and professionals alike.

The Harbor Freight 69672 is a versatile 4-inch bench vise designed to meet the demands of a wide range of applications, from woodworking to metalworking. One of its main features is its sturdy cast iron construction, which ensures durability and stability during use. This material not only offers a robust design but also helps to absorb vibrations, providing a secure grip for various workpieces.

Equipped with a 360-degree swivel base, the 69672 allows users to rotate the workpiece for more convenient access from different angles. This flexibility is particularly useful when working on intricate projects that require precision and detail. The built-in anvil surface is another notable feature, offering a practical area for hammering tasks, which further enhances the tool's functionality.

The jaws of the Harbor Freight 69672 are designed with serrated teeth, providing a firm grip on materials without damaging them. The jaws open to a maximum width of 4 inches, accommodating a variety of workpiece sizes. Additionally, the built-in jaw pads can be replaced, making maintenance easy and ensuring that the vise remains in top working condition over time.

Ease of use is also a key characteristic of the 69672. The large, easy-to-turn handle contributes to its user-friendly design, allowing for quick adjustments without much effort. This feature is particularly beneficial for prolonged use, where comfort is paramount.

In addition to its physical features, the Harbor Freight Tools 69672 is priced competitively, making it an attractive option for both hobbyists and professionals seeking reliable quality without breaking the bank. This product exemplifies the brand’s mission to deliver high-quality tools at accessible prices, reinforcing its reputation in the tool industry.

In summary, the Harbor Freight Tools 69672 bench vise combines robust construction, versatile features, and user-friendly design, making it a valuable asset in any workshop. Whether tackling small household repairs or larger projects, this tool stands out for its quality and functionality.
Top Page Image Contents