Harbor Freight Tools 69672 manual Connecting Electrical Loads

Page 11

Connecting Electrical Loads

Familiarize yourself with the engine controls, power panel and how to start the engine before using the generator. Calculate the wattage of the products you will use with the generator and verify that the generator can handle the total load.

WARNING! Connect only properly wired plugs to the generator. A plug that is spliced onto a different cord may be hazardous.

Only a qualified electrician should wire a plug onto a cord.

CAUTION Never exceed the rated capacity for this Generator, as serious damage to the Generator and/or appliances, tools, and equipment could result from an overload. Starting and running wattage requirements should always be calculated when matching this Generator’s wattage capacity to the appliance, tool, or equipment.

Use the DC12V Receptacle to power 12VDC equipment.

WARNING! Do not charge batteries without a proper charge controller. Do not overcharge.

a.Connect the items that require the most wattage first.

b.Connect “inductive” load appliances, tools, and equipment next. Inductive loads are small hand tools and some small appliances.

c.Connect any lights next.

d.Voltage sensitive appliances, tools, and equipment should be the last to be connected to the Generator. Plug voltage sensitive items such as TV’s, DVD players, microwaves, and cordless telephones into a UL® Listed voltage surge protector (not included). Then, connect the surge protector into the Generator.

IMPORTANT! Failure to connect and operate appliances, tools, and equipment in this sequence can cause damage to the Generator, appliances, tools, and equipment and will void the Warranty of this Generator.

NOTE: If Engine speed or voltage fluctuates with a load below the Generator’s rated watts, move the Engine Choke Lever to the “HALF-CHOKE”position.

SAFETY

SETUP

IF ANY CIRCUIT BREAKERS TRIP CHECK THE FOLLOWING:

1.Make sure that ALL circuit breakers are reset before starting the generator again.

2. Adjust the plugs so the loads are

shared across outlet circuits.

To achieve rated output from the generator, distribute loads over outlets.

Evenly distributed

over outlets:

OPERATION

MAINTENANCE

Item 69672 / 69674

For Generator technical questions, please call 1-800-444-3353.

Page 11

For Engine technical questions, please call 1-800-520-0882.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Set up Precautions Table of ContentsYOU in Minutes Operating PrecautionsSetup Operation Maintenance Carbon Monoxide Hazard Using a generator indoors can KillSafety Setup Operation Maintenance Refueling Service PrecautionsComponents and Controls SpecificationsSafety Setup OFF To Prevent Serious Injury Operation MaintenanceGrounding Generator Pre-Start ChecksInjury from Fire Using the GeneratorChecking and Filling Fuel Operation Starting the EngineIf ANY Circuit Breakers Trip Check the Following Connecting Electrical LoadsExample Wattage Estimate ChartsTo use the table EquipmentStopping the Engine Under Normal Conditions Stopping the Engine in an EmergencyHr. of use Cleaning, Maintenance, and LubricationTo Prevent Serious Injury from Accidental Operation To Prevent Serious Injury from Equipment FailureEngine Oil Change Air Filter Element MaintenanceChecking and Filling Fuel Storage Spark Plug Maintenance10% ethanol E15, E20, E85, etc TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startQty Part Description Parts ListPart Description Part Description Qty Safety Setup OperationAssembly Diagram Assembly Diagram Owner’s Warranty Responsibilities For Both Items Manufacturer’s Warranty CoverageMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69672 specifications

Harbor Freight Tools is renowned for providing quality tools at affordable prices, and one of its standout products is the Harbor Freight Tools 69672. This product epitomizes the brand’s commitment to value and functionality, making it a favored choice among DIY enthusiasts and professionals alike.

The Harbor Freight 69672 is a versatile 4-inch bench vise designed to meet the demands of a wide range of applications, from woodworking to metalworking. One of its main features is its sturdy cast iron construction, which ensures durability and stability during use. This material not only offers a robust design but also helps to absorb vibrations, providing a secure grip for various workpieces.

Equipped with a 360-degree swivel base, the 69672 allows users to rotate the workpiece for more convenient access from different angles. This flexibility is particularly useful when working on intricate projects that require precision and detail. The built-in anvil surface is another notable feature, offering a practical area for hammering tasks, which further enhances the tool's functionality.

The jaws of the Harbor Freight 69672 are designed with serrated teeth, providing a firm grip on materials without damaging them. The jaws open to a maximum width of 4 inches, accommodating a variety of workpiece sizes. Additionally, the built-in jaw pads can be replaced, making maintenance easy and ensuring that the vise remains in top working condition over time.

Ease of use is also a key characteristic of the 69672. The large, easy-to-turn handle contributes to its user-friendly design, allowing for quick adjustments without much effort. This feature is particularly beneficial for prolonged use, where comfort is paramount.

In addition to its physical features, the Harbor Freight Tools 69672 is priced competitively, making it an attractive option for both hobbyists and professionals seeking reliable quality without breaking the bank. This product exemplifies the brand’s mission to deliver high-quality tools at accessible prices, reinforcing its reputation in the tool industry.

In summary, the Harbor Freight Tools 69672 bench vise combines robust construction, versatile features, and user-friendly design, making it a valuable asset in any workshop. Whether tackling small household repairs or larger projects, this tool stands out for its quality and functionality.
Top Page Image Contents