Guardian Technologies 004582-2  Electrical Hazards ,  Explosion Hazards ,  Fire Hazards 

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Commercial-Industrial-Residential Portable Generator System

ELECTRICAL HAZARDS

All generators covered by this manual produce dangerous electrical voltages and can cause fatal electrical shock. Utility power delivers extremely high and dangerous voltages as does the generator when it is in operation. Avoid contact with bare wires, terminals, connections, etc., while the unit is running. Ensure all appropriate covers, guards and barriers are in place before operating the generator. If work must be done around an operating unit, stand on an insulated, dry surface to reduce shock hazard.

Do not handle any kind of electrical device while standing in water, while barefoot, or while hands or feet are wet. DANGEROUS

ELECTRICAL SHOCK MAY RESULT.

The National Electrical Code (NEC) requires the frame and external electrically conductive parts of the generator to be connected to an approved earth ground. Local electrical codes also may require proper grounding of the generator electrical system.

In case of accident caused by electric shock, immediately shut

down the source of electrical power. If this is not possible, attempt to free the victim from the live conductor. AVOID DIRECT CONTACT WITH THE VICTIM. Use a non-conducting implement, such as a rope or board, to free the victim from the live conductor. If the victim is unconscious, apply first aid and get immediate medical help.

Never wear jewelry when working on this equipment. Jewelry can conduct electricity resulting in electric shock, or may get caught in moving components causing injury.

EXPLOSION HAZARDS

Do not smoke around the generator. Wipe up any fuel or oil spills immediately. Ensure that no combustible materials are left on or near the generator, as FIRE or EXPLOSION may result. Keep the area surrounding the generator clean and free from debris.

Gasoline is extremely EXPLOSIVE.

STANDARDS INDEX

In the absence of pertinent standards, codes, regulations and laws, the published information listed below may be used as a guideline for operation of this equipment. Always reference the latest revision available for the standards listed.

1.NFPA No. 70, NFPA HANDBOOK OF NATIONAL ELECTRIC CODE.

2.Article X, NATIONAL BUILDING CODE, available from the American Insurance Association, 85 John Street, New York, N.Y. 10038.

3.AGRICULTURAL WIRING HANDBOOK, available from the Food and Energy Council, 909 University Avenue, Columbia, MO 65201.

4.ASAE EP-3634, INSTALLATION AND MAINTENANCE OF FARM STANDBY ELECTRICAL SYSTEMS, available from the American Society of Agricultural Engineers, 2950 Niles Road, St. Joseph, MI 49085.

5.NFPA No. 30, FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE.

FIRE HAZARDS

For fire safety, the generator must be operated and maintained properly. Operation must always comply with applicable codes, standards, laws and regulations. Adhere strictly to local, state and national electrical and building codes. Comply with regulations the Occupational Safety and Health Administration (OSHA) has established. Also, ensure that the generator is operated in accordance with the manufacturer’s instructions and recommendations. Do not alter the construction of the generator or change controls which might create an unsafe operating condition.

Keep a fire extinguisher near the generator at all times. Extinguishers rated “ABC” by the National Fire Protection Association are appropriate for use on the standby electric system. Keep the extinguisher properly charged and be familiar with its use. If there are any questions pertaining to fire extinguishers, consult the local fire department.

3

Image 5
Contents Ultra Source 11.1 Section Exploded Views and Parts Lists 11.2 11.3Never add fuel while unit is running IntroductionRead this Manual Thoroughly  General Hazards  Important Safety Instructions Explosion Hazards   Electrical Hazards  Fire Hazards  Standards IndexAccessory BOX AssemblyUnpacking Assembling the Wheel KITHandle Assembly Battery ConnectionFuel Tank Tank holds 16 U.S. gallons of fuel Know the Generator2 120 VAC, 20 AMP, Gfci Receptacle 1 120 VAC, 20 AMP, Duplex Receptacle5 12 Volt DC, 10 AMP Receptacle HOW to USE the GeneratorGrounding the Generator 50 aWattage Reference Guide Connecting Electrical LoadsDON’T Overload the Generator Synthetic oil should only be used after first oil change Adding GasolineAdding Engine OIL Stopping the Engine To Start the EngineAutomatic Idle Control Charging a BatteryInitial START-UP Sensing LOW OIL PressureProduct Specifications Maintenance ScheduleGenerator Specifications Engine SpecificationsGeneral Recommendations Replacing the Spark Plug Service AIR CleanerClean Spark Arrestor Screen Install new valve cover gasket Re-attach the valve cover To adjust valve clearanceGeneral To check valve clearanceStore the unit in a clean, dry place  Avoid spray from spark plug holes when cranking engineLong Term Storage Other Storage TipsTroubleshooting Guide Electrical Data Wiring Diagram Drawing No G0731 Electrical Data Handle, Frame & Wheel Kit Drawing No E0695-B QTY Description Control Panel Drawing No G0727-B SWITCH, Rocker -/0 Generator Drawing No G0742-A Exploded Views and Parts Lists Generator Drawing No G0742-A GT-760/990 Engine Drawing No E8589-W Part Sleeve Exploded Views and Parts Lists WINGNUT, Airbox MANUFACTURER’S Emission Control System Warranty Coverage Emission Control System Warranty Warranty Schedule