Gladiator Garageworks 2253351A manual Install the Shelves, To Remove the Shelves

Install the Shelves

IMPORTANT:

■For storage flexibility, you may choose to install just 2 shelves allowing room to store larger items underneath.

■If you are using only 2 shelves, one rail must be attached to the bottom holes at the rear of the frame for support as shown.

1.Place 3 shelf supports across the front and back rails. Place one shelf support across the middle and one shelf support across each end with the notches facing inward.

1

2

2.Place the plywood shelf on the shelf supports, fitting it into the groove of the rails.

3.Repeat this process for the other two shelves.

To Remove the Shelves

1.Lift the plywood shelf off of the rack.

2.Remove the 3 shelf supports.

3.Using a flat-blade screwdriver, pull and hold the rail locking tab out toward you.

4.Using a rubber mallet, pound up on the bottom of the rail to release the rail from the frame.

1.Shelf supports

2.Notch

5