Global Machinery Company RLMC Emptying the grass catcher, Maintenance Changing the mower blade

3.Sharp blades cut cleanly and efficiently, if the blade is dull it will tear the grass. This will result in the ends turning brown. When the blades no longer cut cleanly either sharpen them or replace them.

4.To safely operate the mower ensure all four wheels are on the ground and be careful not to loose your footing or control of the mower. Be very careful when mowing uneven or rough ground. Keep a firm grip on the handle bar at all times, always walk, never run with the mower.

5.For healthier and greener grass do not cut it too short. This can cause damage to the grass and allow weeds to develop. Short grass will also require more watering.

6.Vary your cutting pattern from week to week, this will help to prevent matting and graining of the grass.

7.Before checking a clogged mower deck stop the engine completely and disconnect the spark plug lead and then tilt the mower so the air filter side is facing upwards.

Use a stick the clear any clogged material, never use your hands.

8.Mowing wet grass should be avoided. Wet grass will tend to stay flattened by wheels and not actually cut it. It will also clog the mower deck and if it is slippery you may loose your footing.

9.Always mow across slopes not up and down them. Be extra careful if the grass is wet as this could cause you to slip and loose control of the mower.

10.If the ground is to dry, mowing will stir up a lot of dust which may clog the air filter. It is recommended you check and clean the air filter straight after mowing.

11.Use the side of the mower as a guide to cut close to large objects such as a fence or a wall. Be careful when mowing over obstacles embedded in the lawn such as sprinkler systems and paving, avoid anything that sticks up above the surface of the lawn.

12.Avoid mowing over loose stones, gravel and other landscaping material as this can be picked up by the mower and flung out causing serious personal injury.

13.If the blades do come into contact with something or the mower starts to vibrate stop the engine immediately, remove the spark plug lead and inspect to see if there is any damage.

Emptying the grass catcher

To remove the catcher, raise the guard while lifting the catcher to dislodge it from the hooks.

Do not leave clippings in the catcher for extended periods.

WARNING. Check the catcher frequently for cracks and wear and replace it if damaged.

Maintenance

CAUTION. Before making any adjustment or maintenance procedures to the mower ensure it is turned off and the spark plug lead is removed.

WARNING. It is important that when the mower is tipped backwards the spark plug is highest in the air. Failure to do so will mean that oil will travel into other internal areas, this can cause the mower to have difficulty starting, excessive smoke and oil leaks. Such occurrences are not covered under warranty.

Changing the mower blade

WARNING: Stop the engine and unplug the spark plug before any repairs or maintenance operations.

The blade is made of pressed steel. In order to obtain a clean cut, sharpen the blade periodically after every 25 hours of use. Ensure that the blade is always well balance. A badly balanced blade can involve harmful vibrations and may cause injury.

WARNING. Never carry out any assembly operations or adjustments with the engine running.

1.Periodically check the blade for nicks and dull cutting edges and have it sharpened if needed.

Note. The blade should be sharpened and balanced by an authorised repair centre.

2.If there are rounded or broken ends, thinned metal or other damage, replace the blade.

11