Global Machinery Company RLMC Cutting height adjustment, Inserting the mulcher plug, Brake lever

Page 9

Cutting height adjustment

The GMC mower has one lever to easily adjust the cutting height. There are 10 height settings.

1.To decrease the cutting height pull the height adjustment lever (6) out and move it up a notch, towards the handlebar.

2.To increase the cutting height pull the lever out and move it down a notch, towards the motor.

Note. If you are unsure of which cutting height to use, begin with a high setting and trial a small section of lawn, then check the appearance of the lawn. Then readjust if necessary.

Inserting the mulcher plug

WARNING. When inserting the mulcher plug ensure that the mower is turned off and the blades are at a stand still.

1.Make sure the mower is steady by placing one knee in front of the back wheel.

2.Whilst lifting up the discharge guide place the mulcher plug into the opening at a downward angle. When the plug has got to a point where it can not go in any further place the mulcher plug flat and square it up with the right side of the mower, ensuring it is flush and locked into the right hand side.

Brake lever

The mower is equip with a brake lever (14) to improve the safety of the mower.

During operation the brake lever must be held, if it is let go the engine will automatically stop. To start the lawn mower you must hold the brake lever to the handle bar.

Fuelling

Note. Use fresh unleaded petrol.

1.Unscrew the fuel tank cap (7) and pour the unleaded petrol into the tank with the aid of a funnel.

2.Fill the tank to approximately 2.5 cm below the lowest portion of the neck to allow for fuel expansion.

Be careful not to over fill.

3.Be careful not to spill any petrol, if this happens, wipe the spill with a clean rag.

4.Start the engine at least three meters away from the area where the fuel tank has been filled in order to avoid the risk of fire.

WARNING. Never attempt to refuel the engine while it is running or still warm, allow it to cool before fuelling.

Note. For further information refer to the Fuel Recommendations section in the Briggs & Stratton instruction manual.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 190cc 460MM Contents Introduction Environmental protection Description of symbolsSafety rules for petrol lawn mowers SpecificationsTraining PreparationOperation Maintenance and storageContents of carton Know your product Unpacking AssemblyAssembling the catcher Attaching the catcherInserting the mulcher plug Cutting height adjustmentBrake lever FuellingChecking the oil Mowing adviceStarting the engine Stopping the engineEmptying the grass catcher Maintenance Changing the mower bladePage Page Page Page GMC customer assist

RLMC specifications

Global Machinery Company RLMC stands as a prominent player in the manufacturing sector, recognized for its advanced technological innovations and a broad range of machinery solutions. Established with the vision of delivering superior industrial equipment, RLMC has garnered a reputation for quality, reliability, and performance. Their extensive product portfolio includes machinery for construction, agriculture, and manufacturing, catering to a diverse clientele across various industries.

One of the main features of RLMC is its commitment to integrating cutting-edge technology into their machinery. The company leverages automation and smart technology to enhance productivity and efficiency. This includes the incorporation of IoT (Internet of Things) devices, which allow real-time monitoring and data analysis of machinery performance. Customers benefit from reduced downtime and improved operational insights, making informed decisions to optimize their workflows.

RLMC places a strong emphasis on sustainability and environmentally friendly practices. Their manufacturing processes are designed to minimize waste and energy consumption. Many of their machines are equipped with eco-friendly technology, contributing to lower emissions and compliance with global environmental standards. This focus on sustainability not only aligns with global efforts to reduce environmental impact but also resonates with an increasingly eco-conscious consumer base.

Another hallmark of RLMC is their commitment to research and development. The company invests significantly in R&D to stay ahead of industry trends and technological advancements. This allows RLMC to introduce innovative products that meet the evolving needs of their customers. Whether it's developing more efficient engines or creating machinery that requires less maintenance, the company’s proactive approach ensures they remain at the forefront of the industry.

Customer service and support are also critical aspects of RLMC's business model. The company offers comprehensive after-sales services, including maintenance, training, and parts supply. This commitment to customer satisfaction helps build long-term relationships and ensures that clients can rely on their machinery for years to come.

In conclusion, Global Machinery Company RLMC is characterized by its technological prowess, commitment to sustainability, rigorous research and development, and exemplary customer service. With a focus on delivering high-quality, efficient machinery, RLMC continues to shape the future of the manufacturing industry across the globe.
Top Page Image Contents