Global Machinery Company RLMC instruction manual Operation, Maintenance and storage

Page 5

Operation

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or good artificial light.

If possible, avoid operating the equipment in wet grass.

Always be sure of your footing on slopes.

Walk, never run and do not allow yourself to be pulled along by the lawn mower.

Mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow on slopes of more than 20°.

Exercise extreme caution when pulling the lawn-mower towards you.

Stop the blade if the lawn mower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawn mower to and from the area to be mowed.

Never operate the lawn mower with defective guards, or without safety devices, such as the stoneguard and/or grass-catcher, in place.

Do not change the engine governor settings or over speed the engine.

On power-driven models, disengage the drive clutch before starting the engine.

Start the engine carefully, following the instructions and keeping feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the engine on a flat surface that is free of obstacles and tall grass.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Never pick up or carry a lawn mower while the engine is running.

Stop the engine and disconnect the spark plug wire:

Before carrying out any work underneath the cutting deck or before unclogging the chute;

Before checking, cleaning or working on lawn mower;

After striking a foreign object. Inspect the lawn mower for damage and make repairs before restarting and operating the lawn mower;

If the lawn mower starts to vibrate abnormally (find and remove the cause of the vibration immediately).

Stop the engine:

Whenever you leave the lawn mower unattended. Remove the key from models with electric starters.

Before refuelling.

Every time you remove or replace the grass-catcher.

Reduce the throttle before turning off the engine and turn the fuel off when you have finished mowing, following the instructions in the engine handbook.

When mowing, always keep to a safe distance from the rotating blade. This distance is the length of the handle.

Never cut grass while walking backwards.

Stop the engine before pushing mower across gravel drives, walks or roads.

Maintenance and storage

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential for safety and performance.

Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a spark or a source of extreme heat.

Allow the engine to cool before storing in an enclosed space.

To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage area free of grass, leaves, or excessive grease. Do not leave containers with grass cuttings in rooms.

5

Image 5
Contents 190cc 460MM Contents Introduction Environmental protection Description of symbolsSafety rules for petrol lawn mowers SpecificationsTraining PreparationOperation Maintenance and storageContents of carton Know your product Unpacking AssemblyAssembling the catcher Attaching the catcherInserting the mulcher plug Cutting height adjustmentBrake lever FuellingChecking the oil Mowing adviceStarting the engine Stopping the engineEmptying the grass catcher Maintenance Changing the mower bladePage Page Page Page GMC customer assist

RLMC specifications

Global Machinery Company RLMC stands as a prominent player in the manufacturing sector, recognized for its advanced technological innovations and a broad range of machinery solutions. Established with the vision of delivering superior industrial equipment, RLMC has garnered a reputation for quality, reliability, and performance. Their extensive product portfolio includes machinery for construction, agriculture, and manufacturing, catering to a diverse clientele across various industries.

One of the main features of RLMC is its commitment to integrating cutting-edge technology into their machinery. The company leverages automation and smart technology to enhance productivity and efficiency. This includes the incorporation of IoT (Internet of Things) devices, which allow real-time monitoring and data analysis of machinery performance. Customers benefit from reduced downtime and improved operational insights, making informed decisions to optimize their workflows.

RLMC places a strong emphasis on sustainability and environmentally friendly practices. Their manufacturing processes are designed to minimize waste and energy consumption. Many of their machines are equipped with eco-friendly technology, contributing to lower emissions and compliance with global environmental standards. This focus on sustainability not only aligns with global efforts to reduce environmental impact but also resonates with an increasingly eco-conscious consumer base.

Another hallmark of RLMC is their commitment to research and development. The company invests significantly in R&D to stay ahead of industry trends and technological advancements. This allows RLMC to introduce innovative products that meet the evolving needs of their customers. Whether it's developing more efficient engines or creating machinery that requires less maintenance, the company’s proactive approach ensures they remain at the forefront of the industry.

Customer service and support are also critical aspects of RLMC's business model. The company offers comprehensive after-sales services, including maintenance, training, and parts supply. This commitment to customer satisfaction helps build long-term relationships and ensures that clients can rely on their machinery for years to come.

In conclusion, Global Machinery Company RLMC is characterized by its technological prowess, commitment to sustainability, rigorous research and development, and exemplary customer service. With a focus on delivering high-quality, efficient machinery, RLMC continues to shape the future of the manufacturing industry across the globe.