Global Machinery Company PB26D instruction manual Storage and maintenance after use, Problems

Page 10

3.Wash the filter in detergent and water. Rinse the filter thoroughly. Squeeze out excess water. Allow it to dry completely before reinstalling.

4.Install the element and cover and then tighten the retaining screw.

Servicing

•It is recommended once you first use your petrol blower have it serviced after 15 hours of use.

•From thereafter, service the petrol blower every 2 years.

Storage and maintenance after use

•When you finish working, clean the petrol blower completely.

•Inspect the entire blower and tubes for damage, including loose or missing components, and repair anything necessary.

•Store the petrol blower away from direct sunlight.

•Do not store in a nylon bag as this can encourage the formation of mould.

•Use a small brush to clean off the outside of the unit and keep the air vents free from obstructions. Do not use water or a hose to clean the unit.

Whenever the machine is not used for a long period of time, proceed as follows:

•Give the petrol blower an overall cleaning and a thorough check.

•Empty the fuel tank completely, then clean the carburetor and lines by running the blower until it stops from lack of fuel.

•Protect all metal engine parts from corrosion by coating them with oil.

•Remove the spark plug, put several drops of oil into the cylinder through the spark plug hole and then pull the recoil starter 2 to 3 times in order to distribute the oil evenly. Replace the spark plug and spark plug cover.

•Clean the air filter as described in the air filter section.

Problems

Power loss or sudden stopping of the engine

•Check whether the fuel tank is empty.

•There is water in the mixture. Drain and rinse the fuel system with petrol.

•The air filter is dirty. Clean the air filter.

Starting a flooded engine

•Disconnect the spark plug lead, and use the plug wrench to remove the spark plug in a counter clockwise direction.

•If the spark plug is fouled or is soaked with fuel, clean or replace the plug as required.

•Clean excess fuel from the combustion chamber by cranking the engine several times while the spark plug is removed.

•Install the spark plug and firmly tighten it with the spark plug wrench.

•Repeat the starting procedure as if the blower was already warm.

Adjusting the engine idle speed

•If your blower is delivering poor performance or running roughly then you may need to adjust the engine idle speed.

•Start the blower engine.

•Run the engine at idle speed until operating temperature is reached, approximately 2–3 minutes.

•Use a screwdriver to adjust the engine idle speed to (2800–3000) RPM.

•Turn the idle screw clockwise to increase engine idle speed.

•Turn the idle screw counter clockwise to decrease engine idle speed.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Petrol Blower Contents Introduction Description of symbolsSpecifications Environmental protectionSafety rules for petrol blowers Substitute faulty silencersUnpacking Additional safety rules for petrol blowersContents of carton Turn off the engine if you must leave the blower unattendedKnow your product Before 10 hours After 10 hours AssemblyMixing the fuel Filling the fuel tankStarting the blower OperationChoke control Blowing MaintenanceStopping the blower Use of the petrol blowerStorage and maintenance after use ProblemsIf the engine wont stop GMC customer assist

PB26D specifications

The Global Machinery Company PB26D is an advanced piece of equipment that has gained significant attention in the construction and heavy machinery industry. This machine offers a combination of ruggedness, efficiency, and reliability, making it an ideal choice for various applications, from construction sites to landscaping projects.

One of the standout features of the PB26D is its powerful engine, which provides exceptional horsepower while maintaining excellent fuel efficiency. This makes the machine capable of tackling heavy loads and demanding tasks without sacrificing performance. The advanced engine technology ensures lower emissions, adhering to stringent environmental regulations while still delivering the power required for challenging jobs.

The PB26D is designed with an ergonomic operator cabin that enhances comfort and accessibility. With adjustable seating, intuitive controls, and excellent visibility, operators can work for extended periods without fatigue. The cabin is also equipped with modern climate control systems, ensuring a comfortable working environment regardless of outdoor conditions.

In terms of technology, the PB26D incorporates advanced hydraulic systems that improve lifting capabilities and overall performance. Its hydraulic design allows for precise movements, enabling operators to execute complex maneuvers with ease. This precision is particularly beneficial in urban environments where space is often limited.

Durability is a hallmark of the PB26D, with reinforced materials and components built to withstand the rigors of daily use. The machine features a robust chassis and proven components that resist wear and tear, resulting in lower maintenance costs and longer service life. This makes it an investment that pays off over time, as operators can rely on its consistent performance without frequent downtime.

Safety is also a top priority for the PB26D, with several built-in features designed to protect both the operator and the machine. These include advanced braking systems, stability controls, and operator presence sensors. The strategic placement of these features ensures that the machinery operates efficiently while minimizing risks on the job site.

In summary, the Global Machinery Company PB26D stands out as a reliable and efficient machine suited for a wide range of applications. Its powerful engine, ergonomic design, advanced hydraulic systems, and safety features make it a valuable asset for contractors and operators alike. Whether for construction, landscaping, or other heavy-duty tasks, the PB26D is equipped to deliver performance and durability in demanding environments.
Top Page Image Contents