Safety rules for petrol blowers

Training

•Read the instructions carefully. Get familiar with the controls and proper use of the equipment.

•Only use the blower for the purpose for which it was designed, i.e. blowing garden debris. Any other use can be hazardous, causing damage to the machine.

•Never allow children or people unfamiliar with these instructions to use the blower. Local regulations may restrict the age of the operator.

•Never use the blower:

–When people, especially children, or pets are nearby.

–If the operator has taken medicine or substances that can affect his ability to react and concentrate.

•Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

•While blowing, always wear sturdy footwear and long trousers. Do not operate the equipment with bare feet or open sandals.

•WARNING: DANGER! Engine fuel is highly flammable:

–Store fuel in containers specifically designed for this purpose.

–Refuel using a funnel and outdoors only. Do not smoke while re-fuelling or whenever handling the fuel.

–Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

–If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the fuel has evaporated and the vapour dispersed.

–Replace all fuel tanks and containers caps securely.

•Substitute faulty silencers.

•Before use, always inspect the machine and check that the screws are not worn or damaged.

•It is advisable to wear suitable eye protection when operating the blower.

Maintenance and storage

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential for safety and performance.

•Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a spark or a source of extreme heat.

•Allow the engine to cool before storing in an enclosed space.

•To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment (if applicable) and fuel storage area free of grass, leaves, or excessive grease.

•If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.

•For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts that are not of the same quality can damage the equipment and be dangerous for your safety.

•Fuel goes off fairly quickly. If you find your blower does not start, 1st change the fuel in the tank with newly purchased fuel.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Operation safety instructions

WARNING. Stop the engine and unplug the spark plug before any repairs or maintenance operations.

•Check that all nuts, bolts and screws are well tightened before every use.

•Do not run the engine in an enclosed and/or poorly ventilated area. The gas of the engine contains carbon monoxide, which is dangerous to your health.

•Work only when there is sufficient light.

•Do not use the blower when it is raining or when the grass is wet.

PB26D specifications

The Global Machinery Company PB26D is an advanced piece of equipment that has gained significant attention in the construction and heavy machinery industry. This machine offers a combination of ruggedness, efficiency, and reliability, making it an ideal choice for various applications, from construction sites to landscaping projects.

One of the standout features of the PB26D is its powerful engine, which provides exceptional horsepower while maintaining excellent fuel efficiency. This makes the machine capable of tackling heavy loads and demanding tasks without sacrificing performance. The advanced engine technology ensures lower emissions, adhering to stringent environmental regulations while still delivering the power required for challenging jobs.

The PB26D is designed with an ergonomic operator cabin that enhances comfort and accessibility. With adjustable seating, intuitive controls, and excellent visibility, operators can work for extended periods without fatigue. The cabin is also equipped with modern climate control systems, ensuring a comfortable working environment regardless of outdoor conditions.

In terms of technology, the PB26D incorporates advanced hydraulic systems that improve lifting capabilities and overall performance. Its hydraulic design allows for precise movements, enabling operators to execute complex maneuvers with ease. This precision is particularly beneficial in urban environments where space is often limited.

Durability is a hallmark of the PB26D, with reinforced materials and components built to withstand the rigors of daily use. The machine features a robust chassis and proven components that resist wear and tear, resulting in lower maintenance costs and longer service life. This makes it an investment that pays off over time, as operators can rely on its consistent performance without frequent downtime.

Safety is also a top priority for the PB26D, with several built-in features designed to protect both the operator and the machine. These include advanced braking systems, stability controls, and operator presence sensors. The strategic placement of these features ensures that the machinery operates efficiently while minimizing risks on the job site.

In summary, the Global Machinery Company PB26D stands out as a reliable and efficient machine suited for a wide range of applications. Its powerful engine, ergonomic design, advanced hydraulic systems, and safety features make it a valuable asset for contractors and operators alike. Whether for construction, landscaping, or other heavy-duty tasks, the PB26D is equipped to deliver performance and durability in demanding environments.