Global Machinery Company PB26D Stopping the blower, Blowing, Use of the petrol blower

Page 9

Stopping the blower

Stop the engine by pressing the off button (12) and holding it for 2 seconds.

Blowing

Start the blower engine, as previously described. Hold the blower firmly about 10 - 20 cm

from the ground and move it in a sweeping motion from left to right, directing the debris to the desired location.

•Use low throttle settings when clearing lightweight materials from around lawns or shrubbery.

•Use medium to higher throttle settings to move lightweight grass or leaves from driveways or paths.

•Use full throttle when moving heavy loads such as dirt or snow.

IMPORTANT. Blower noise increases at higher throttle settings. Always use the lowest throttle setting required to get the job done.

•Never operate the blower unless it is properly assembled and in good working condition.

•Never operate the blower without a properly functioning muffler and spark arrestor installed.

Use of the petrol blower

•The GMC petrol blower can efficiently move a wide variety of debris ranging from grass clippings to gravel. As a general rule try to operate the blower at the lowers throttle setting necessary to get the job done.

•Prior to use of the blower ensure you have read and understood this instruction manual.

•Ensure you are wearing suitable clothing and also safety equipment like safety glasses, ear protection and a mask if necessary.

Maintenance

WARNING. Before performing any maintenance on this blower, stop the engine and disconnect the spark plug wire.

Checking the spark plug

Check the spark plug every 10 - 15 hours of use.

Note. There is a replacement spark plug included with the blower.

1.Remove the spark plug cover.

2.Use the spark plug wrench to remove the spark plug, by turning it counter-clockwise.

3.Clean and adjust the spark plug gap to 0.6 - 0.7mm. Replace any damaged or visibly worn plug with a CHAMPION RCJ6Y,

NGK BPM9A or equivalent spark plug.

4.Install the spark plug finger tight in the cylinder head, then tighten it firmly with the spark plug wrench.

Air filter

The air filter should be checked approximately every 10 hours of use, or more frequently in dusty areas.

1.Loosen the air filter cover retaining screw (16), and remove the cover and filter element.

2.Inspect the element. If the element is distorted or damaged, replace it with a new one.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Petrol Blower Contents Specifications Description of symbolsIntroduction Environmental protectionSubstitute faulty silencers Safety rules for petrol blowersContents of carton Additional safety rules for petrol blowersUnpacking Turn off the engine if you must leave the blower unattendedKnow your product Mixing the fuel AssemblyBefore 10 hours After 10 hours Filling the fuel tankOperation Starting the blowerChoke control Stopping the blower MaintenanceBlowing Use of the petrol blowerProblems Storage and maintenance after useIf the engine wont stop GMC customer assist

PB26D specifications

The Global Machinery Company PB26D is an advanced piece of equipment that has gained significant attention in the construction and heavy machinery industry. This machine offers a combination of ruggedness, efficiency, and reliability, making it an ideal choice for various applications, from construction sites to landscaping projects.

One of the standout features of the PB26D is its powerful engine, which provides exceptional horsepower while maintaining excellent fuel efficiency. This makes the machine capable of tackling heavy loads and demanding tasks without sacrificing performance. The advanced engine technology ensures lower emissions, adhering to stringent environmental regulations while still delivering the power required for challenging jobs.

The PB26D is designed with an ergonomic operator cabin that enhances comfort and accessibility. With adjustable seating, intuitive controls, and excellent visibility, operators can work for extended periods without fatigue. The cabin is also equipped with modern climate control systems, ensuring a comfortable working environment regardless of outdoor conditions.

In terms of technology, the PB26D incorporates advanced hydraulic systems that improve lifting capabilities and overall performance. Its hydraulic design allows for precise movements, enabling operators to execute complex maneuvers with ease. This precision is particularly beneficial in urban environments where space is often limited.

Durability is a hallmark of the PB26D, with reinforced materials and components built to withstand the rigors of daily use. The machine features a robust chassis and proven components that resist wear and tear, resulting in lower maintenance costs and longer service life. This makes it an investment that pays off over time, as operators can rely on its consistent performance without frequent downtime.

Safety is also a top priority for the PB26D, with several built-in features designed to protect both the operator and the machine. These include advanced braking systems, stability controls, and operator presence sensors. The strategic placement of these features ensures that the machinery operates efficiently while minimizing risks on the job site.

In summary, the Global Machinery Company PB26D stands out as a reliable and efficient machine suited for a wide range of applications. Its powerful engine, ergonomic design, advanced hydraulic systems, and safety features make it a valuable asset for contractors and operators alike. Whether for construction, landscaping, or other heavy-duty tasks, the PB26D is equipped to deliver performance and durability in demanding environments.
Top Page Image Contents