www.dell.com | support.dell.com
36 Using Your Projector
Video Source Menu
NOTE: This menu is only available with S-video, Video (composite) signal
connected.
SATURATION—Adjust a video source from black
and white to fully saturated color. Press to
decrease the amount of color in the image and
to increase the amount of color in the
image.
SHARPNESS—Press
to decrease the
sharpness and to increase the sharpness.
TINT—Press
to increase the amount of
green in the image and to increase the
amount of red in the image.
RF Learning Connections
Auto Learning to Change RF Channel Between
Remote Controller and Projector
• Power on the projector.
• Press the "Menu" button on control
panel, then enter to "
Management
--
>
RF_Ch Learning
" menu.
• Select
Yes
with the control buttons to
enter the
Learning Standby
mode. The
projector will switch to standby mode
for
RF Learning
and display the
RF
Learning
menu.
• Open the battery cover on the remote
control and press the
Prgm
button to
initiate the
RF Learning
process for the
remote control and projector.
Back to Factory Default for the RF Channel
• Select
Yes
on
RF Learning Setting
menu and then enter the
RF Reset to
Default
menu. Select
Reset to Default
Channel
, the projector will back to the
factory default channel.