Dell 5100MP owner manual Factory Reset Menu

HOR. POSITION—Press

Factory Reset Menu

FACTORY RESET—Select Yes to reset the projector to its factory default settings. Reset items include both computer image and video image settings.

Computer Source Menu

NOTE: This menu is only available connected to a computer.

FREQUENCY—Change the display data clock frequency to match the frequency of your computer graphics card. If you see a vertical flickering bar, use Frequency control to minimize the bars. This is a coarse adjustment.

TRACKING—Synchronize the phase of the display signal with the graphic card. If you experience an unstable or flickering image, use the Tracking to correct it. This is a fine adjustment.

NOTE: Adjust the Frequency first and then the Tracking.

to adjust the horizontal position of the image to the left and to adjust the horizontal position of the image to the right.

VER. POSITION—Pressto adjust the vertical position of the image down and to adjust the vertical position of the image up.

Using Your Projector

35